*mydirectindustry

Strip-Feed-Press

Product catalog summary

Overview: The document provides technical specifications and operational details for a strip-feed press designed for stamping various round and non-round lids and ends, as well as deep drawing operations. The press features a unique 60° inclined C-frame body reinforced by tie rods to prevent misalignment in tooling.

Key Features:

Design: The press has a 60° inclined C-frame body with additional reinforcement to ensure precision in operations.
Guidance System: Long guide rails are used to direct the ram, enhancing die life.
Feeding System: Vacuum suckers and a cross-feeding system with main and auxiliary feeding bars guide strips into the press efficiently, preventing idle strokes.
Ejection System: A roller ejector removes the skeleton-strip from the press.
Safety Features: A sensor stops the press automatically if two strips are lifted simultaneously or if a strip is damaged.
Magazine Loading: The magazine can be easily loaded from the rear.

Technical Specifications:

Models: PDE 30-SLS, PDE 50-SLS, PDE 75-SLS
Capacity: 30 to 75 tons
Throat Depth: 220 mm to 290 mm
Stroke Adjustment: 8-80 mm to 12-100 mm
Number of Strokes: 0-220 l/m to 0-140 l/m
Press Table Size: 600 x 425 mm to 830 x 560 mm
Ram Size: 220 x 180 mm to 300 x 200 mm
Distance Table-Ram: 340 mm to 425 mm
Ram Adjustment: 50 mm to 80 mm
Passing Width in Body to Rear: 260 mm to 400 mm

Catalog excerpts

For further information please contact: Biagosch & Brandau GmbH & Co. KG Tel: +49 4123 68 00 00 E-Mail: [email protected] Technical Data Sheet / Strip-Feed-Press Our strip-feed press is dedicated for stamping diﬀerent round and nonround lids and ends, but also deep drawing operations. It is special because of its 60° inclined C-frame body, which is additionally enforced by two tie rods on the open side. This prevents missguided movements in the toolings. We use long guide rails to direct the ram to obtain maximum die life. Vacuum suckers separate the strips. A cross feeding system with main and auxiliary feeding bars guides the strips into the press, without causing idle strokes. A roller ejector transports the skeleton-strip out of the press. A sensor automatically stops the press if two strips are lifted at a time or a strip is damaged. The magazine can easily be charged from the rear. The main components of the strip-feed press are: Technical data Capacity Stroke adjustable Press table Distance table-ram Passing width in body to rear Biagosch & Brandau GmbH & Co. KG Schusterring 19 · 25355 Barmstedt-German

Open the catalog to page 1

All Biagosch & Brandau Gmbh & Co KG catalogs and technical brochures

Lockstar
1 Page
Fancystar
1 Page
Other stamping Presses
1 Page
Unistar
1 Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list