MONOMIX & TWINMIX Concrete Mixing Plants
12Pages

Modular, containerized, high-performance mixing plants TRANSFORMING MATERIALS INTO VALUE

TRANSFORMING MATERIALS INTO VALUE The company BHS-Sonthofen, headquartered in Sonthofen, Germany, is an owner-operated group of companies in the field of machine and plant engineering. We offer technical solutions in the field of mechanical process engineering, with a focus on mixing, crushing, recycling and filtration. With over 300 employees and a number of subsidiaries, BHS-Sonthofen has a global presence. Over 125 years of experience in mixing technology BHS-Sonthofen invented the first twin-shaft batch mixer back in 1888 and has been systematically upgrading the design ever since....

BHS mixing plants The highly mobile BHS concrete mixing plants stand up to adverse ambient conditions, frequent changes of location and permanent operation at maximum load in the harshest of construction conditions. Both the MONOMIX variant with one mixer and the TWINMIX as a dual plant are thus an investment that offers value stability and high availability. At the heart of every plant is the BHS twin-shaft batch mixer that has proven its worth thousands of times over.

Inclined belt conveyor ^ » Catwalk on both sides » Slewable in case of a twin-plant (TWINMIX) Container with mixer platform ^ » BHS twin-shaft batch mixer » Cement scales » Air compressor » Electric switch cabinet Container with weighing platform ^ » Aggregate holding hopper » Water scales with pump » Scales for chemical additives » Dust filter with pneumatic discharge Control room container h » PC-based hardware » Air conditioning and heating » Very good overview Cement silos ^ » Pneumatic filling » Dust filter » Screw conveyor for each silo » Portable foundation elements Chemical storage...

Installation of a BHS concrete mixing plant ready for operation Installation of the chemical storage and control room containers on leveled ground Positioning the mixer module on the container base. Fastening with twist-lock elements Sliding the discharge hopper into the guide rails Installation of the support beam on the mixer module Installation of the weighing module

Installation of the cement silos and screw conveyors Assembly of the aggregate batcher (consisting of three transport units) Positioning the inclined belt conveyor Completion of the internal connections and the electrical plug-in connections

BHS MIXING PLANTS IN TWO VARIANTS 8

Batcher Depending on the application and the location, batchers with four, six or eight chambers are available, as are various special designs. The batchers can be installed parallel to the inclined belt or at an angle of ninety degrees. Bunker cover The individual chambers of the batcher can be designed with bunker covers that are actuated either hydraulically or by means of electric motors. These covers are of a warp-resistant design and can also be insulated. Grating Gratings are available to prevent extraneous materials from entering the batcher. They are pivot-mounted on the edge of...

Twinmix 3.0 in operation in an airport construction project Twinmix 3.0 in operation in a road construction project Monomix 3.0 for producing ready-mixed concrete and precast concrete

D Dependent on the cycle time, concrete quality and aggregate type 2) Value in brackets = mixing time 3) Value corresponds to the max. transport weight/unit without batcher 4) The length of the plant depends on the batcher variant. The values specified here refer to the 6-chamber, 2-aggregate batcher Performance data for other materials available on request. All specifications apply to the standard design. Technical data for customized designs may differ from the specified data. All technical data may change due to development. Subject to modification without notice.

CRUSHING TECHNOLOGY RECYCLING TECHNOLOGY FILTRATION TECHNOLOGY 03.2015_801000117_EN, © 2015 BHS-Sonthofen GmbH – All rights reserved. MIXING TECHNOLOGY