COMPASS ACCES CONTROL SYSTEM • SAFE USE. > Identification of the cards is carried out in an environment which is separate from the reading one, thereby guaranteeing the system's inaccessibility even if the card reader is tampered with. • A MODEL FOR EVERY NEED. > Multiple application possibility thanks to the broad range of cards managed (up to 6000) in standalone mode. > The wide range of components and accessories makes it possible to create a product to measure for every need. • SMART TECHNOLOGY. > Parameter variations are made without interrupting operation of the system. D113684 - COMPASS SC 232 • Stand-alone unit (with no permanent PC connection) • The system performs independent access control, allowing functions to be configured via the Securbase Light or Securbase Plus software • In stand-alone mode it is able to handle 6000 recognition devices and stores all associated events and relative date and time parameters. COMPASS-SC: Control unit for access control systems capable of handling up to 32 peripheral devices (Compass-485, RTD-CA). Supply voltage: 230 Vac. Inputs: open pushbutton, door status sensor. Passageway control output: 12A 250 Vac relay. Auxiliary output (door open alarm): 12A 250Vac relay. Connections: RS485 serial port for connecting to other system peripherals, RS232 serial port to communicate with the PC. Degree of protection: IP20. Number of storable events in the stand-alone version: 65000 without keypad. Alarms: Buzzer. Installation: wall-mounted D113256 - COMPASS 485 • Installed inside the protected area, this unit memorises the card codes and receives signals from the Compass Slim. It manages: • door opening input • door status input • door alarm output • door lock output • up to 6000 cards as a stand-alone system COMPASS 485: Management unit for COMPASS SLIM Power supply voltage: 230 Vac Inputs: opening button, door status sensor Access control output: 10A 250V relay with insulated contact Auxiliary output (door-open alarm): 10A 250V relay Degree of protection: IP20 Programming: by means of Master Cards or PC Serial interface: RS485 (2 wires) Installation: wall-mounted. D113691 - COMPASS SC USB The same characteristics as Compass SC but with serial USB interface for connecting to the personal computer. D113257 - COMPASS 232 • To connect up to 19 Compass 485 units to the PC serial port • All the readers can be connected to a PC by the network to increase the number of codes which can be managed • Also includes operation of a Compass 485 unit COMPASS 232: Serial converter RS485 - RS232 Power supply voltage: 230 Vac Inputs: opening button, door status sensor Access control output: 10A 250V relay with insulated contact Degree of protection: IP20 Number of peripheral units which can be connected: 19 Number of cards which can be memorised in standalone version: 6000 Programming: by means of Master Cards or PC Installation: wall-mounted. D113704 - COMPASS SLIM • Proximity reader for indoor and outdoor use with compact size and thickness. • Built with vandalproof materials. • Detection distance 3-4 cm. For combination with COMPASS - SC, 485, 232. • Compatible with RTD CA and CLONIX 4 RTE. • Output connection with protocol according to COMPASS SLIM: Proximity reader to be used with COMPASS SC, 485, 232. Power supply voltage: 12Vdc (supplied by Compass SC, 485, 232) Degree of protection: IP44 Max connection distance between reader and management unit: 10 metres Reading distance: 3-4 cm Signal indications: Buzzer + two-colour LED Installation: wall-mounted.

ACCESSORIES D413130 - COMPASS-ATS Anti-vandalism enclosure for COMPASS-READER. Two-channel rolling code transmitter and transponder, incorporated for reading by a proximity reader. Four-channel rolling code transmitter and transponder incorporated for reading by a proximity reader. 2048 code rolling code receiver and built-in display for programming. It can be used with COMPASS SYSTEM. Makes it possible to manage openings with radio controls, with COMPASS ISOCARD and with COMPASS RING cards. D110917 - COMPASS ISOCARD PERSONALIZZATA On request, card customisation, with 1 colour, minimum quantity...