- Catalogs
- bfs - batterie füllungs systeme GmbH
- Push-in Plug IV
Push-in Plug IV
1 / 1 PageView full catalog
Push-in Plug IV
Product catalog summary
Technical Specifications:
- Components: Lid, T-piece, Body, Valve, Valve case, O-ring, Spindle, Float, Adapter, Guiding case, Lever, Water entry.
- Dimensions: Various diameters including Ø 42.0 mm / 1.65", Ø 35.2 mm / 1.38", Ø 19.0 mm / 22.0 mm, Ø 0.75" / 0.87".
- O-ring: 21.0 mm / 0.80".
- Float Stroke: 4.0 mm / 0.157".
- Valve Stroke: 1.6 mm / 0.063".
- Leverage Ratio: 2.4:1.
- Filling Pressure: Minimum 0.2 bar / 2.9 psi, Maximum 3.8 bar / 55 psi.
- Flow Rate: With 6 plugs in series:
- 0.3 bar / 4.4 psi: 2050 ml/min
- 0.4 bar / 5.8 psi: 2540 ml/min
- 0.5 bar / 7.3 psi: 3150 ml/min
- 1.0 bar / 14.5 psi: 5080 ml/min
- All parts are assembled using snap-in methods, without glue or heat seal.
- All components are recyclable at the end of their life cycle.
- Valve case and guiding case dimensions depend on float size, ranging from 39 mm to 84 mm / 1.54" to 3.30".
See more
Catalog excerpts
Technical Data Technical data Flow rate with 6 plugs in series at pressure Float stroke Valve stroke Water entry Valve T-piece Lever Body O-ring Valve case Adapter Guiding case Spindle Valve case Float All parts are assembled by means snap-in, no glue, no heat seal. All parts can be recycled at end of life cycle. 39 to 84 mm / 1.54 to 3.30" depends on the float size
Open the catalog to page 1All Bfs - batterie füllungs systeme GmbH catalogs and technical brochures
Clip-in Plug IV1 Page
Float Measurements1 Page
Flip Top Manual Plug1 Page
Push-in Plug III1 Page
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.