- Catalogs
- bfs - batterie füllungs systeme GmbH
- Push-in Plug III
Push-in Plug III
1 / 1 PageView full catalog
Push-in Plug III
Product catalog summary
Technical Specifications:
- Components: Lid, T-piece, Body, Valve, Valve case, O-ring, Spindle, Float, Lever.
- Dimensions:
- Water entry: Ø 38.0 mm / 1.50"
- T-piece: Ø 35.2 mm / 1.38"
- Valve: Ø 22.0 mm / .87"
- Spindle: Ø 19.0 mm / .75"
- Float Stroke: 4.0 mm / .157"
- Valve Stroke: 1.6 mm / .063"
- Leverage Ratio: 2.4 : 1
- Filling Pressure: Minimum 0.2 bar / 2.9 psi, Maximum 3.8 bar / 55 psi
- Flow Rate:
- 0.3 bar / 4.4 psi: 1640 ml/min
- 0.4 bar / 5.8 psi: 2030 ml/min
- 0.5 bar / 7.3 psi: 2420 ml/min
- 1.0 bar / 14.5 psi: 3600 ml/min
- All parts are assembled using snap-in methods, without glue or heat seal.
- All components are recyclable at the end of their life cycle.
- Float size affects the overall dimensions, ranging from 44 mm to 86 mm / 1.54" to 3.30".
See more
Catalog excerpts
Technical Data Technical data Flow rate with 6 plugs in series at pressure Float stroke Valve stroke Water entry Valve T-piece Lever Body O-ring Valve case Body Valve case 44 to 86 mm / 1.54 to 3.30" depends on the float size All parts are assembled by means snap-in, no glue, no heat seal. All parts can be recycled at end of life cycle.
Open the catalog to page 1All Bfs - batterie füllungs systeme GmbH catalogs and technical brochures
Clip-in Plug IV1 Page
Float Measurements1 Page
Flip Top Manual Plug1 Page
Push-in Plug IV1 Page
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.