Overview: This document provides specifications and measurements for various battery components, focusing on float sizes and related parameters for traction and stationary batteries.

Specifications: The document lists part numbers along with corresponding measurements for float sizes. The measurements are categorized under T1 and T2, where T1 refers to the top of the cell to the base of the float, and T2 refers to the top of the cell to the top of the electrolyte level. The filling level T2 is crucial for stationary batteries and has a tolerance of +/- 2.0mm (0.075").

Procedures: The document mentions the use of a float spindle extension (bfs 070001) which adds an additional 13mm (0.5") to the measurements.

Components: Various components such as threaded plugs, push-in plugs, and bayonet/clip plugs are mentioned, with references to bfs III and bfs IV standards.

Key Measurements: The table provides detailed measurements for each part number, indicating the dimensions in millimeters for both T1 and T2 across different configurations.

Recommendations: For stationary batteries, the T2 measurement is primarily decisive, indicating its importance in ensuring proper battery function.