- Catalogs
- bfs - batterie füllungs systeme GmbH
- Clip-in Plug IV
Clip-in Plug IV
1 / 1 PageView full catalog
Clip-in Plug IV
Product catalog summary
Technical Specifications:
- Product: Clip-in Plug IV with Float Housing
- Art. No.: I4N260/330/420
- Components: Lid, T-piece, Body, Valve, Valve case, O-ring, Spindle, Float, Lever, Adapter
- Dimensions: Various diameters and lengths for different parts
Technical Data:
- Float stroke: 4.0 mm / 0.157 inches
- Valve stroke: 1.6 mm / 0.063 inches
- Leverage ratio: 2.4:1
- Filling pressure: Minimum 0.2 bar / 2.9 psi, Maximum 3.8 bar / 55 psi
- Flow rate with 6 plugs in series at different pressures:
- 0.3 bar / 4.4 psi: 2050 ml/min
- 0.4 bar / 5.8 psi: 2540 ml/min
- 0.5 bar / 7.3 psi: 3150 ml/min
- 1.0 bar / 14.5 psi: 5080 ml/min
Assembly and Recycling:
- All parts are assembled using snap-in methods, without glue or heat seal.
- All components are recyclable at the end of their life cycle.
See more
Catalog excerpts
Technical data Flow rate with 6 plugs in series at pressure Float stroke 4,0 mm / .157" 0,3 bar / 4.4 psi 2050 ml/min Valve stroke 1,6 mm / .063” 0,4 bar / 5.8 psi 2540 ml/min Filling pressure min. 0,2 bar / 2.9 psi | max. 3,8 bar / 55 psi 1,0 bar / 14.5 psi 5080 ml/min Valve case Water entry All parts are assembled by means snap-in, no glue, no heat seal. All parts can be recycled at end of life cycle
Open the catalog to page 1All Bfs - batterie füllungs systeme GmbH catalogs and technical brochures
Float Measurements1 Page
Flip Top Manual Plug1 Page
Push-in Plug IV1 Page
Push-in Plug III1 Page
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.