BM 180/T/EL mod.800/1100 (Soft Loop & Patch Handle)

Product catalog summary

Production Line Overview for Soft Handle Bags

The production line for soft handle bags is equipped with several specialized units designed to ensure efficient and high-quality manufacturing. Below is a summary of the key components and their functions:

1. Un-Winder Unit

Width: 1400 mm
Features a reel loading system using steel levers driven by hydraulic cylinders and a pump.
Includes an automatic edge control system to maintain constant tension.

2. In-Line Folding and Sealing Units

V Board Folding (Triangle Unit) with a width of 1400 mm.
Bottom gusset device and double top folding unit.
Continuous sealing unit for top folding.

3. Soft Handle Attachment

Double un-winder system on a steel shaft with cones and belt brake for tension control.
Material is pulled by a rubber roller driven by a servo motor.
Cutting and pliers operations are controlled by servo motors.
Welding system is pneumatically operated with high precision temperature control.

4. Electronic Servo Drive Automatic Bag-Making Machine (BM 250 / T – EL Model 800)

Feeding unit with a pulling rubber roller driven by an A.C. motor and inverter, controlled through a dancing roller for self-adjusting speed.
Dancing roller unit with several idle rollers for proper tension control.
Primary nip-roll section with two corrugated rubber rollers.
Servo motor drive for material feeding with Omron brush-less motor.
Photo-cell control for printed material and electronic eye with different program selections.
Side weld system with adjustable knife for material thickness.
Main motor drive combined with a gear box A.C. type with inverter.
Three anti-shock antistatic bars with high capacity.
Water cooling unit for sealing bars with a closed circuit and pump.
Conveyor belt driven by an A.C. motor and inverter control.
Slow-down unit at machine exit to reduce bag speed.
Transversal table with conveyor driven by an A.C. motor.
Main electrical control cabinet with P.L.C. control system.

5. Production Capacities

Carrier Bags and Banana Handle: 140/160 bags per minute.
Patch Handle and Banana Handle: 110/130 bags per minute.
Soft Handle Bags: 80/120 bags per minute.

Contact Information

Costruzione Macchine per Materie Plastiche, 21058 Solbiate Olona, Italy

Phone: +39.0331.641.104 | Fax: +39.0331.640.177

Email: [email protected] | Website: www.bfm.it

Catalog excerpts

BM 180/T/EL mod.800/1100 (Soft Loop & Patch Handle)-1

COMPLETE LINE FOR “SOFT HANDLE BAGS” THE PRODUCTION LINE IS EQUIPPED WITH FOLLOWING UNITS: N° 1 UN-WINDER UNIT WIDTH 1400 MM, suitable to un-wind reel at constant tension with: - Reel loading system through steel levers driven by hydraulic cylinders and pump - Automatic edge control system N° 1 In Line “V” Board folding (Triangle unit) 1400 mm, N° 1 Bottom gusset device and Double top folding unit. N° 1 Continuos sealing unit top folding N° • • • • • 1 Attachment for “SOFT HANDLE Bags” complete with: Double un-winder system on steel shaft with cones and belt brake for tension control Material pulled by rubber roller and driven by Servo motor. Cutting controlled by Servo motor. Pliers controlled by Servo motor. Weldig system pneumatically operated and controlled by temperature control – high precision.

Open the catalog to page 1

BM 180/T/EL mod.800/1100 (Soft Loop & Patch Handle)-2

Electronic SERVO DRIVE AUTOMATIC BAG-MAKING machine type BM 250 / T – EL model 800 complete as follow: • Feeding unit suitable for material feeding into the bag-maker. Pulling rubber roller dia. 120 mm driven by A.C. motor and Inverter controlled through a dancing roller for self adjusting speed. • Dancing roller unit with several idle rollers suitable to mantain proper tension control • Primary nip-roll section with two corrugated rubber rollers • Servo motor drive for material feeding with Omron brush-less motor. • Set of air-fingers suitable for pulling material through nip-roller. • Photo-cell...

Open the catalog to page 2