| PRODUCT SPEC SHEET Lipped Spigot • A selection of BFM® T304L spigots are available with a 6mm deep ‘lip’ on the end of the tail PHYSICAL PROPERTIES: This lip enables the spigot to be attached to compatible quick connect modular tubing/piping systems. Interior Finish The spigot lip clamps in place with corresponding modular lip using quick-release clamp systems. Wall Thickness Eliminates the need for welding to attach the spigot to pipework. A BFM® Lipped Spigot has a 6mm shorter tail than the standard BFM® spigot ie. total spigot height is 83mm. To enable the installation of a TR (Tool Release) connector, a 6mm / 15/64” hole can be drilled in the top seat of the spigot head. AVAILABLE SIZES: Diameters (* Ø100mm measured externally (OD) - all other diameters measured internally (ID). Note that there is a -1 / + 3mm tolerance on the tail diameter of all spigot sizes.) Note: For applications where there is a possibility for static build up, e.g. wood dust, flour, milk powder etc., we recommend using a static dissipative wire (strip), connecting the two BFM® spigots together. BFM® GLOBAL LTD. | E: [email protected] | WEB: BFMfitting.com V1 JUL 2023