FLAME SCANNER 2.0GT
6Pages

Product Information FLAME SCANNER 2.0GT

• failsafe design • suitable for continuous operation • use at ambient temperatures from -40 °C to +85 °C (optional fiber optic insert up to 300 °C) • approved according to international standards • protection class IP 65 • IECEx-certified 1 | Design The Flame Scanner 2.0GT forms a complete flame monitoring system in combination with a flame amplifier of the 3000 series. The flame monitoring and evaluation system 3000 was developed under the aspects of safety and optimal availability of gas turbines. Our goals are to monitor gas turbines safely and reliably, to provide criteria for...

3 | Housing versions The Flame Scanner 2.0GT is available in standard housing for direct installation on gas turbines. Standard housing Length A: BFI Automation Mindermann GmbH | Flame Scanner 2.0GT (SMD)

4 | Technical data Spectral sensitivities Power supply Current consumption max. 200 mA each Flame Scanner Self checking fully electronic, once per second Sight port connection ATEX Zone 2 ATEX Marking Ambient temperature BFI Automation Mindermann GmbH | Flame Scanner 2.0GT (SMD

Back Panel Flame Amplifier (3000 series) Flame signal Self test impulse 6 | Part number Type Part number BFI Automation Mindermann GmbH | Flame Scanner 2.0GT (SMD)

MEMBER OF MINDERMANN GROUP BFI Automation Mindermann GmbH Ruegenstr. 7 42579 Heiligenhaus . Germany T +49 2056 989 46-0 info@flamonitec-bfi.com www.flamonitec-bfi.com All data are without guarantee and refer to the product group. Product-specific information is contained in the operating instructions. We reserve the right to make technical changes. | © BFI Automation Mindermann GmbH 2023/