FLAME SCANNER 2.0
6Pages

Product Information FLAME SCANNER 2.0

• failsafe design • suitable for continuous operation • use at ambient temperatures from -40 °C to +85 °C (optional fiber optic insert up to 300 °C) • approved according to international standards • protection class IP 65/IP66 • IECEx-certified 1 | Design The Flame Scanner 2.0 forms a complete flame monitoring system in combination with a flame amplifier of the 3000 series. The flame monitoring and evaluation system 3000 was developed under the aspects of safety and optimal availability of customer plants. Our goals are to monitor incinerators safely and reliably, to provide criteria for...

3 | Housing versions The Flame Scanner 2.0 is available in two housing variants for direct installation on the burner. Standard housing Length A: BFI Automation Mindermann GmbH | Flame Scanner 2.0 (SMD)

4 | Technical data Spectral sensitivities Power supply Current consumption max. 200 mA each Flame Scanner Self checking fully electronic, once per second Sight port connection ATEX Zone 1 ATEX Marking Ambient temperature ATEX Zone 2 ATEX Marking Ambient temperature BFI Automation Mindermann GmbH | Flame Scanner 2.0 (

Back Panel Flame Amplifier (3000 series) Flame signal Self test impulse 6 | Part number Type Part number BFI Automation Mindermann GmbH | Flame Scanner 2.0 (SMD)

MEMBER OF MINDERMANN GROUP BFI Automation Mindermann GmbH Ruegenstr. 7 42579 Heiligenhaus . Germany T +49 2056 989 46-0 info@flamonitec-bfi.com www.flamonitec-bfi.com All data are without guarantee and refer to the product group. Product-specific information is contained in the operating instructions. We reserve the right to make technical changes. | © BFI Automation Mindermann GmbH 2023/