PRODUCT INFORMATION PART-NO. 6590-9020-01 Fiber Optic Lance Applications •h igh temperatures at the viewing position • in case of strong vibrations at the viewing position • space problems at the viewing position • tilting burners The Fiber Optic Lances are an extension of the application range of our flame monitoring systems. They are characterized by their high temperature and vibration resistant and their robust design. This makes them ideal for applications where the installation or cooling of an electronic probe is difficult or impossible. High-quality quartz fibers are used, which with their transmission spectra from the ultraviolet to the visible to the far infrared range are optimally matched to the semiconductor sensors of the flame sensor. This makes it possible to use it in different emission limits of flame radiation and thus an application for all types of fuel. The glass fibers are integrated into a flexible, robust cable with stainless steel cladding and silicone jacket. The fiber optic cable is thus characterized by water and dust tightness, acid resistance and temperature stability. Technical changes reserved. The probe is equipped with optics that project light with a viewing angle of 2.7° or 6° onto a fiber optic cable. The probe has a ambient temperature stability of up to +600 °C. The lengths of the optical fibers depend on the local conditions and are selected for specific systems. The total length should not exceed 20 m. BFI Automation Mindermann GmbH | Ruegenstr. 7 . 42579 Heiligenhaus . Germany T +49 2056 98946-0 . [email protected] . www.flamonitec

1 | Design Fiber Optic Lances are developed and manufactured on project- and customer-specific basis. The lance can be assembled from any combination of rigid and flexible sections, which allows for specific and individual solutions. The rigid sections are usually used for fastening or for feeding purging and/or cooling air. Fiber Optic Lances laid in guide tubes are easy to maintain because they can be removed from the system and reinstalled. 1. ½" cooling air connection 2. Flange accor. customer specification 3. Rigid part of guide tube 4. Flexible part of guide tube 5. Connection for Scanner...

2 | Applications Poorly accessible viewing positions through long burner designs The radiation intensity of the flame monitoring is reduced significantly by long forms of burners. Fiber Optic Lances can be mounted directly at the fuel outlet of such burner design and thus detect the flame radiation from a short distance from the original flame. This increases not only the flame intensity but also the external light safety in multi-burner systems. Tilting burner Especially for tilting burners, the requirement for flame monitoring is very high, as the viewing position is dynamic. Monitoring is...

Ambient temperature Flange connection Ø Bundle with Agraf-tube Stainless steel Guide tube Bending radius Technical changes reserved. | © BFI Automation Mindermann GmbH 2022/24 Spectral transmission range UV IR BFI Automation Mindermann GmbH | Ruegenstr. 7 . 42579 Heiligenhaus . Germany T +49 2056 98946-0 . [email protected] . www.flamonitec-b