COMPACT FLAME CONTROLLER CFC2000L

Product catalog summary

Product Overview: The Compact Flame Controller CFC2000L by BFI Automation Mindermann GmbH is a sophisticated optical flame monitor designed for single and multi-burner systems. It features a compact and failsafe design suitable for continuous operation across a wide ambient temperature range from -55 °C to +85 °C, with optional fiber optic inserts extending up to 300/600 °C.

Design and Functionality: The CFC2000L integrates a flame relay and analog output, providing both binary and analog signals for flame monitoring. It supports up to four adjustable parameter levels, enhancing reliability under demanding conditions. The device uses a sensor to detect flame radiation, offering advantages in environments with small sight tubes and extraneous light.

Customer Benefits: The controller is ideal for various industrial combustion applications, supporting all fuel types. Its compact design simplifies installation and reduces spare parts storage. The large dynamic range of sensors allows for monitoring flames with varying radiation intensities.

Housing Versions: The CFC2000L is available in different housing versions for use with fiber optic cables, including ATEX Zone 2 and Zone 1 compliant models, with varying dimensions and protection ratings (IP65/IP66).

Technical Data: The device supports spectral sensitivities in UV and IR ranges, with a power supply of 24 V DC and a maximum current consumption of 200 mA. It features adjustable safety switch-off times and optional wire break detection.

Connection and Part Numbers: The document provides connection diagrams and part numbers for different configurations, including ATEX Zone 2 and Zone 1 models, with specific part numbers for UV and IR types.

Catalog excerpts

Product Information COMPACT FLAME CONTROLLER CFC2000L

Open the catalog to page 1

• compact design • failsafe design • suitable for continuous operation • use at ambient temperatures* from -55 °C to +85 °C (optional fiber optic insert up to 300/600 °C) • visualization of the operating status on the device by LED • approved according to international standards • adjustable via software • SIL 3-certified 1 | Design The Compact Flame Controller CFC2000L is a complete, optical flame monitor for single and multi-burner systems. Its compact design integrates the flame relay and analog output and provides the binary signal "Flame ON/OFF" as well as the analog signal "0/4 mA to 20...

Open the catalog to page 2

2 | Customer benefits and usage • ideally suited for use in single or multi-burner applications • software-based evaluation of flame signals provides safe flame monitoring for complex combustions • compact design reduces installation efforts and spare parts storage • usable for all industrial combustions • suitable for all types of fuel • large dynamic range of the sensors enables flame monitoring of very small and very large radiation intensities 3 | Housing versions The Compact Flame Controller CFC2000L is available in the following housing versions for use with a fibre optic cable. B b1 ATEX...

Open the catalog to page 3

4 | Technical data Spectral sensitivities Spectral range Power supply Current consumption Operating temperature* Explosion proof international standards availabe Relais outputs flame relay (switch-over, potential-free) ready for operation (NO, optional) wire break detection (optional) Analogue output Safety switch-off time * for the specified temperature ranges heaters may be necessary. BFI Automation Mindermann GmbH | Compact Flame Controller CFC2000L

Open the catalog to page 4

Special Cable KW6 Flame relay root Flame ON Flame OFF Power supply (+24 V DC) Power supply (GND) IR COM Port Analogue output (0/4 mA to 20 mA) Remote selection parameter level 2 Failure output (+24 V DC) Further connection diagrams with special configurations (ready for operation contact, heating, etc.) available on request. 6 | Part numbers Type BFI Automation Mindermann GmbH | Compact Flame Controller CFC2000L

Open the catalog to page 5

MEMBER OF MINDERMANN GROUP BFI Automation Mindermann GmbH Ruegenstr. 7 42579 Heiligenhaus . Germany T +49 2056 989 46-0 info@ﬂamonitec-bfi.com www.ﬂamonitec-bfi.com All data are without guarantee and refer to the product group. Product-specific information is contained in the operating instructions. We reserve the right to make technical changes. | © BFI Automation Mindermann GmbH 2022/

Open the catalog to page 6

All BFI Automation Mindermann GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list