COMPACT FLAME CONTROLLER CFC2000
6Pages

{{requestButtons}}

Catalog excerpts

COMPACT FLAME CONTROLLER CFC2000 - 1

Product Information COMPACT FLAME CONTROLLER CFC2000

Open the catalog to page 1
COMPACT FLAME CONTROLLER CFC2000 - 2

• compact design • failsafe design • suitable for continuous operation • use at ambient temperatures* from -55 °C to +85 °C • visualization of the operating status on the device by LED • approved according to international standards • adjustable via software • SIL 3-certified 1 | Design The Compact Flame Controller CFC2000 is a complete, optical flame monitor for single and multi-burner systems. Its compact design integrates the flame relay and analog output and provides the binary signal "Flame ON/OFF" as well as the analog signal "0/4 mA to 20 mA" directly. It is suitable for continuous...

Open the catalog to page 2
COMPACT FLAME CONTROLLER CFC2000 - 3

2 | Customer benefits and usage • ideally suited for use in single or multi-burner applications •s oftware-based evaluation of flame signals provides safe flame monitoring for complex combustions • compact design reduces installation efforts and spare parts storage • usable for all industrial combustions •s uitable for all types of fuel • large dynamic range of the sensors enables flame monitoring of very small and very large radiation intensities 3 | Housing versions The Compact Flame Controller CFC2000 is available in the following housing versions for direct mounting on the burner. A...

Open the catalog to page 3
COMPACT FLAME CONTROLLER CFC2000 - 4

4 | Technical data Spectral sensitivities Spectral range Power supply Current consumption Explosion proof international standards available Relais outputs flame relay (switch-over, potential-free) ready for operation (NO, optional) wire break detection (optional) Analogue output Safety switch-off time Sight port connection * for the specified temperature ranges heaters may be necessary. BFI Automation Mindermann GmbH | Compact Flame Controller CFC20

Open the catalog to page 4
COMPACT FLAME CONTROLLER CFC2000 - 5

Special Cable KW6 Flame relay root Flame ON Flame OFF Power supply (+24 V DC) Power supply (GND) IR COM Port Analogue output (0/4 mA to 20 mA) Remote selection parameter level 2 Failure output (+24 V DC) Further connection diagrams with special configurations (ready for operation contact, heating, etc.) available on request. 6 | Part numbers Type BFI Automation Mindermann GmbH | Compact Flame Controller CFC2000

Open the catalog to page 5
COMPACT FLAME CONTROLLER CFC2000 - 6

MEMBER OF MINDERMANN GROUP BFI Automation Mindermann GmbH Ruegenstr. 7 42579 Heiligenhaus . Germany T +49 2056 989 46-0 info@flamonitec-bfi.com www.flamonitec-bfi.com All data are without guarantee and refer to the product group. Product-specific information is contained in the operating instructions. We reserve the right to make technical changes. | © BFI Automation Mindermann GmbH 2023/

Open the catalog to page 6

All BFI Automation Mindermann GmbH catalogs and technical brochures