K-BALL® SERIES
7Pages

K-BALL® SERIES SPRAY NOZZLES SPRAY NOZZLES

Clip-on spray nozzles DIMENSIONS SPRAY CHARACTERISTICS: These nozzles simply clip over a pre-drilled Made of corrosion-resistant plastic and pipe (9/16” dia. hole) and are available with a stainless steel. Heavy-duty spring clip good variety of spray balls, in various spray patterns, flow rates and spray angles. TYPICAL APPLICATIONS: • Parts Cleaning • Pretreatment • Spray Washing & Rinsing Double clip model also available. The unique BEX “Finger” systerm holds the ball securely in alignment to prevent ball movement while tightening the cap. the “Finger” is available on all BEX K-Ball®...

Clip-on spray nozzle balls BF FLAT-V SPRAY NOZZLE BALLS SPRAY CHARACTERISTICS: COLOR CODING: Spray is fan-shaped with spray angles of 15° The more popular models of the flat-V spray to 110°. Spray density tapers off toward the nozzle balls are color coded by flowrate for outside to permit overlapping of the spray easier identification. patterns while maintaining uniform spray density. Equiv. Orifice Diam. (in) Equiv. Orifice Diam. (in) Purple Green Yellow Blue Lt. Blue Purple Green Tip Color Lt. Blue Purple Green Equiv. Orifice Diam. (in) Equiv. Orifice Diam. (in) SPRAY ANGLE @ SPRAY ANGLE...

Clip-on spray nozzle balls BF FLAT-V SPRAY NOZZLE BALLS SPRAY CHARACTERISTICS: COLOR CODING: Spray is fan-shaped with spray angles of 15° The more popular models of the flat-V spray to 110°. Spray density tapers off toward the nozzle balls are color coded by flowrate for outside to permit overlapping of the spray easier identification. patterns while maintaining uniform spray density. Tip Color Lt. Blue Purple Green Tip Color Brown Black Black Equiv. Orifice Diam. (in) Equiv. Orifice Diam. (in) Equiv. Orifice Diam. (in) Equiv. Orifice Diam. (in) SPRAY ANGLE @ SPRAY ANGLE @ SPRAY ANGLE @...

Clip-on spray nozzle balls BFL FLOODING SPRAY NOZZLE BALLS SPRAY CHARACTERISTICS: TYPICAL APPLICATIONS: A wide, flat shaped spray with low impact. The Flooding nozzles are often used at the spray is deflected 75° from the centerline of the beginning and end of phosphate stages, to prevent mist carry over. They can also be used for “wetting” surfaces during long drain stages. Grey Grey Grey Grey Grey Grey Grey Grey Grey Grey Grey Grey Equiv. Equiv. Orifice Orifice Diam. Diam. (in) (in) SPRAY SPRAY ANGLE @ ANGLE @ BPH HOLLOW CONE PHOSPHATING NOZZLE BALLS SPRAY CHARACTERISTICS: TYPICAL...

Clip-on adapters CLIP-ON ZIP-TIP® ADAPTERS THREADED BALLS (for K-Ball nozzle assemblies) TYPICAL APPLICATIONS: Expand your range of nozzle choices by using threaded balls. Threaded balls are made of glass reinforced polypropylene, with 1/8”, 1/4” and 3/8” NPT female threads. (BSPT also available) Please note: The 5B has an angular adjustment of only 34º. Ball has a hexagonal interior for easy holding! CONVERSION O-RING For installing BEX K-Ball clip-on nozzles into holes drilled to a 21/32 diameter. Replaces the standard BEX O-Ring

Threaded bodies The BEX threaded K-BalP body provides the ability to adjust the direction of the spray pattern by simply twisting the K-Ball® cap, repositioning the nozzle and tightening the cap. The same 52°nozzle angle of adjustability exists in the threaded body as in the K-BalP clip-on body. This plastic threaded body is useful when a metal clip is undesirable or where space limitations prevent using a spring clip-on nozzle. MODELS AVAILABLE: Use the threaded K-BalP to "tilt" the spray pattern into any desired orientation. High Impact Flat Spray Flat-V Spray Full Core Spray Hollow Cone...