CRISBAG® TOTE-BASED ICS BHS FOR AIRPORTS BRINGING REDUNDANT, END-TO-END BAGGAGE HANDLING TO AIRPORTS CrisBag® is a best-in-class tote-based ICS baggage handling system. It is designed for use in airports, combining baggage sorta-tion, early baggage storage and transportation in one system. Each item of baggage remains in the same individually controlled tote throughout the complete process from check-in to baggage storage, certified in-tote screening and transportation to make-up, including the potential for batch building. This enables CrisBag® to deliver 100% tracking and traceability at every stage of the baggage handling process. More and more airports around the world opt for individual carrier system technology for baggage handling. CrisBag® is a proven ICS chosen by leading airports across five continents and at least seven of the nine exclusively Skytrax 5 star-rated international airports have currently implemented ICS. > Compact and modular design using standard modules for flexible configuration and reduced footprints > All elements factory tested, and quality guaranteed > ’One bag per tote’ and a unique ’one tote per section’ concept > In-tote screening eliminates the need to remove baggage from the tote > Three tote sizes; standard and large totes running on the same track. > Fast, safe, and flexible baggage handling from check-in to discharge > 100% accurate track-and-trace of baggage through every stage > Ultra-low energy consumption and maintenance cost > Compact and custom configuration using standard modules > High operational efficiency and eliminates bag jams.

HIGH MODULARITY MEANS GREATER FLEXIBILITY The CrisBag® system is flexible enough to deliver systems ranging from the very small and simple, to extremely large and highly complex by using a wide range of standard modules. Each system can combine a mix of baggage handling elements, such as top- and side-loaders and discharges. Straight, curved, merge and divert transport sections can be installed at angles ranging from 0 to 15 degrees. The unique combination of these standard modules allows CrisBag® to be exactly configured to fit any airport. Greater flexibility also means high efficiency and...

The recovery of braking energy means energy is fed back into the system for later use and the automatic start-stop comes from each CrisBag® section being independently controlled to intelligently power-off sections immediately when not in use. Tilt mechanisms can be selected by monitoring baggage flows upstream and downstream. The system controls select dynamic tilt in peaks or static tilt during off-peak periods to put less stress on system components. These features not only reduce the system’s total energy consumption by up to 60% compared to a conventional conveyor system, but they also reduce...

> Nominal sorting: 2.3 m/sec (7.6 ft/sec) > Dynamic discharge 3,000 totes/h > Static discharge 1,800 totes/h Baggage dimensions > Minimum baggage size Maximum baggage size Standard tote size Large tote size Oversize tote also available BEUMER GROUP'S GLOBAL SUCCESS BEUMER Group has over 1,500 system installations worldwide including small regional airports and major international hubs. A comprehensive selection of case studies is available on our website at https://www.beumergroup.com/i/airport- BEUMER Group A/S www.beumergroup.com DK-8200 Aarhus N BEUMER Group reserves the right to make modifications...