APRON CONVEYORS MOVING HOT MATERIAL EFFICIENTLY CONVEYING TECHNOLOGY

It is a matter of operational reliability when conveying hot materials that can leave the kiln cooling system with temperatures of up to 700 °C. In these situations, an innovative, robust and reliable conveying system is required. Sophisticated technology, many years of experience and maximum precision make sure that BEUMER Group apron conveyors cater for maximum economic efficiency. EFFICIENT TRANSPORTATION EVEN IF IT GETS EXTREMELY HOT The highly heat-resistant BEUMER apron conveyors, using either a belt or chain, transport hot materials such as clinker safely - even in case of high temperatures,...

Steel box conveyors for inclinations from 0° to 60° * with a conveying speed of 0.3 m/s and a degree of filling of 100 % PRACTICAL RUNNER FASTENING The low-wear and dust-proof runner of the apron conveyors is fastened to the cell bottom by a clamping pipe. This permits self-adjusting of the runner so that the latter does not have to be further adjusted during installation. In addition, the runner can be exchanged within minutes. CHAINS FOR DIFFERENT LOADS The chains are designed as steel-bushed roller chain with a pitch of 315 mm and can be used as single or double-strand chain. An optimum adaptation...

When the challenges increase BEUMER have an extremly efficient solution to overcome difficult material flows and conveying height: The belt apron conveyors of BEUMER Group help to optimally fulfil these requirements when transporting hot material, for example clinker, behind the rotary kiln. Additionally, these conveyors provide reduced capital costs, low maintenance costs and a long service life. HOT CAPACITY WITH PEAK VALUES The belt apron conveyors of BEUMER Group are able to convey hot materials, as for example clinker, with angles of inclination of up to 60° without particular measures,...

Transport of hot materials with temperatures of up to 600 °C and higher Design of belt apron conveyors COST BENEFITS EVERYWHERE QUIET OPERATION FOR HIGHER PRODUCTIVITY The narrow and weight-reduced design of the belt apron conveyors reduces the steel structure and freight costs. Furthermore, the minor net weight lowers the static and dynamic loads which, for example, affect the clinker silo. Within the framework of a new construction project, the silo can be dimensioned to a more restricted load and thus the construction costs can be reduced. The lightweight design also lowers operational costs....

Design of tipping tray conveyors The use of high-quality materials in connection with an innovative technology and careful processing, caters for long service life and thus for a high economic benefit. MORE AND MORE FLEXIBILITY > Several feeding and discharging points are possible > Transport in the upper and return strand The tipping tray conveyor with intermediate discharge station is used at those places where several feeding and discharging points can be optionally approached or different materials such as clinker, limestone and gypsum can be transported and distributed at the same time....

In order to prevent pollution of systems and environment, BEUMER Group has developed a silo discharge system which is compatible with the apron conveyors and minimises the dust exposure while the bulk materials are transferred from the silo to the apron conveyors. THE SILO DISCHARGE SYSTEM A gravity-draining silo discharge system is used as interface between the clinker silo and the apron conveyor. Owing to its constructive design, the silo discharge system is able to close against the standing material accumulation and therefore the dedusting unit can be omitted in this area. The discharge rate...

BEUMER Group offers the suitable technology also for the onward transport of bulk materials, enabling open vehicles to be loaded with reduced dust development. INTELLIGENT, DUST-REDUCED LOADING Various bulk loading heads, with integrated wear protection and a loading capacity of up to 300 m2/h, are available for the dust-reduced loading of open vehicles. When the loading process starts, the bulk loading head is lowered to the floor of the vehicle and the material feed is switched on. The bulk loading head is raised automatically by a fill level switch in the lower dedusting hood, which is activated...

WELL-PROVEN BEUMER APRON CONVEYORS BEUMER APRON CONVEYORS IN OPERATION WORLD-WIDE BEUMER APRON CONVEYORS ›› Lafarge, Poland ›› CRH, Serbia ›› Yamama, Saudi-Arabia ›› TPI, Thailand ›› Dangote, Kongo BEUMER BELT APRON CONVEYORS ›› Cemex, Germany ›› Aalborg Portland, Denmark ›› Jidong Cement, China ›› TPI, Thailand ›› Holcim, Argentina BEUMER LOADING SYSTEMS ›› HeidelbergCement, Romania ›› P.T. Semen, Indonesia ›

BEUMER Group is known worldwide for its individually tailored customer support. This is based on a global network of regional service centres. Our support solutions will keep your systems operating -24 hours a day, 365 days a year.

Our customer care programme entitles you to multiple service options, such as maintenance and repair on site through our field service engineers or regular safety checks according to statutory rights. If hardware replacements are needed, our comprehensive warranty service ensures you are always covered. We are constantly developing new ways to upgrade our software and hardware to extend a system’s lifetime, lower energy costs and increase efficiency. We will keep you informed of all relevant upgrade opportunities, based on an understanding of your business and system needs. We offer standard...

Beumer reserves the right to make modifications that serve technical progress. Products and technologies carrying BEUMER's “made different” seal are characterised by their sustainability based on their economic, environmental and social performance as measured by the BEUMER Sustainability Index (BSI).