| made ■ in ■ Germany Tapping valves.

BEULCO Tapping Valves A tapping valve is used to connect domestic service lines and is the transition from the main supply pipe to the building. It realizes a branch, without taking the supply line out of service and thus avoids the impairment of entire districts or supply areas. The product range is characterized by special properties that differ significantly from other types of fittings on the market. Sealing surfaces The plastic inner lining of the models 250, 752 and 762 serves as a sealing surface in addition to the protection against deposits. This has the advantage that no elastomeric...

| made ■ in | Germany BEULCO Tapping Valves Tapping valve bracket with ball pre-shutoff Model 250 High-lift fitting with ball pre-shutoff for tapping without the use of auxiliary shut-off devices. There is only one connector with patented Vario-seal necessary for the whole nominal size range from DN 80 to DN 500. The Vario-seal gets factory-mounted into the connector, so unintentional twisting or loss at the construction site can be avoided. The seal material corresponds to the KTW-recommendations of the Federal Environment Agency (UBA) as well as to the requirements acc. to DVGW W270. • for...

APPLICATION Dl •■= Drinking water Tapping valve bracket with ball pre-shutoff - upper outflow Model 290 Flat slider with ball pre-shutoff for water until PN 16 (optional for gas until PN 5) and for upper tapping 1" - 14" under pressure. The connector has an extremely low height, which minimizes the excavation. After upper tapping the outflow gets realized by an elbow union. As an integrated stop valve the fitting uses a chrome-plated switching ball, which is driven from an outer angle. The maximum possible tapping is 14". There is only one connector with patented Vario-seal necessary for the...

BEULCO Tapping Valves Tapping valve bracket with ball pre-shutoff Model 295 Flat slider with stop valve for water until PN 16 (optional for gas until PN 5) and for upper tapping 1“ - 1½“ under pressure. Thread outlet 1“ - 1½“ parallel to the supply line. The connector has an extremely low height, which minimizes the excavation. After upper tapping the outflow gets realized by an elbow union. After upper tapping the outflow gets realized by an elbow union. As an integrated stop valve the fitting uses a chrome-plated switching ball, which is driven from an outer angle. The maximum possible tapping...

APPLICATION Dl •■= Drinking water Tapping valve bridge with lateral outflow Model 752 Tapping valve bridge with stop valve and for tapping 1/“ - 2". The combined rubber insert between fitting and pipe is chambered and has three sealing collars. The tapping has to be closed over the lateral outflow with an auxiliary shut-off device and has to be sealed until the upper part of the valve is mounted again. Depending on the dimension the upper part might be needed with a fitting mating clamp. The seal material corresponds to the KTW-recommendations of the Federal Environment Agency (UBA) as well as...

| made ■ in | Germany BEULCO Tapping Valves Tapping valve bridge with lateral outflow and integrated Niro-tapping cutter Model 762 Tapping valve bridge with stop valve and for tapping 1/“. The upper part of the milling valve for tapping is already mounted under pressure - ready for use. The tapping cutter with chambered sleeve prevents the drilling chips from being flushed out. The seal material corresponds to the KTW-recommendations of the Federal Environment Agency (UBA) as well as to the requirements acc. to DVGW W270. Application • for plastic pipes (PE oder PVC) DN 50 - 200 • for water PN...

APPLICATION Dl •■= Drinking water BEULCO Overview Image Accessories Small drilling device Model 800.1 Threaded screw Model 800.2 VLUX®- tapping adapter Model 940.1 Flush sleeve Model 800.3 Auxiliary shut-off device

made in Germany TAPPING VALVE BRACKET Model 250 for cast iron-, steel- and asbestos cement pipes* DN 80-500 with lateral outflow and ball pre-shutoff (further information regarding this model cf. page 4) Item may differ from the picture. TAPPING VALVE BRACKET Model 290 for cast iron-, steel- and asbestos cement pipes DN 80-500 with ball pre-shutoff and upper outflow (further information regarding this model cf. page 5) Available for gas on request. 1 1/4" female thread 1 1/2" female thread 2" female thread VLUX® TAPPING VALVE BRACKET Model 295 for cast iron-, steel- and asbestos cement pipes...

APPLICATION Dl •■= Drinking water HB-NIRO BRACKET Model 02 with calotte for tapping valve brackets, Model 250, 290 and 295 Item may differ from the picture. ST = steel pipe G = cast iron pipe AZ = asbestos cement pipe

made in Germany BEULCO Tapping Valves TAPPING VALVE BRIDGE Model 752 for plastic pipes (PE oder PVC) DN 50 - 200 with lateral outflow (further information regarding this model cf. page 7) Item may differ from the picture.

APPLICATION Dl •■= Drinking water TAPPING VALVE BRIDGE Model 762 for plastic pipes (PE oder PVC) DN 50 - 200 with lateral outflow with integrated Niro-tapping cutter (further information regarding this model cf. page 8) Item may differ from the picture.

made in Germany Accessories BEUCLO Tapping Valves DRILLING DEVICE Model 800.1 for tapping of tapping valves with threaded outflow and for all tapping valves up to 2" (Picture with flush sleeve - please order separately) Item may differ from the picture.

APPLICATION G • 1= GasDl •!= Drinking water SEAL Model 800.4 for threaded screw and flush sleeve Item may differ from the picture. VLUX®-TAPPING ADAPTER Model 940.1 used as connector between VLUX®-valves and the flush sleeve of the drilling device 1 1/4" female thread 11g right/steel zinc-plated 1 1/2" female thread 11g right/steel zinc-plated 2" female thread 11g right/steel zinc-plated 1 1/4" female thread 10g left/steel zinc-plated 1 1/2" female thread 10g left/steel zinc-plated 2" female thread 10g left/steel zinc-plated 1 1/4" female thread 11g left/steel zinc-plated 1 1/2" female thread...