Manifold Technology
24Pages

{{requestButtons}}

Catalog excerpts

Manifold Technology - 1

Manifold Technology.

Open the catalog to page 1
Manifold Technology - 2

EVERYTHING UNDER CONTROL.

Open the catalog to page 2
Manifold Technology - 3

Manifold Technology - I BEULCO heating and cooling manifolds made of high-quality brass ensure an efficient and equal heat distribution and thus constant temperatures. In connection with integrated regulation valves the manifolds guarantee the exact setting of flow quantity. All BEULCO manifolds are ready to connect, leak tested and equipped with sound-insulated fastening elements. BEULCO manifolds are available in different versions and guarantee practice-conform combination possibilities so that for each application the ideal product can be found. Overview Type heating and cooling...

Open the catalog to page 3
Manifold Technology - 4

Characteristics Depending on the situation, it is sometimes necessary to change flow and return. With BEULCO heating and cooling manifolds this is no problem. Exception: when using topmeters – these have to be installed into the return. If needed, heating circuits can be mounted in a way that the outlets point upwards. In this case you can change the trunks or only the valves without problems. Stop valve upper part In order to guarantee a long life the spindles of the valves have been treated by vibratory finishing and are double sealed by two o-rings. Due to the vibratory finishing there...

Open the catalog to page 4
Manifold Technology - 5

without sealing end: 55mm + (number of circuits x 50mm) with sealing end: 65mm + (number of circuits x 50mm) without sealing end: 60 mm + (number of circuits x 50 mm) with sealing end: 70 mm + (number of circuits x 50 mm)

Open the catalog to page 5
Manifold Technology - 6

Hydraulic Balancing Different norms and regulations, among them the Energy-saving Decree (EnEv) in Germany, VOB/C DIN 18380, DIN EN 14336 and DIN EN 12831, require a hydraulic balancing. This is an important precondition for the perfect functioning and the energy-efficient operation of a plant. Only with a system that is hydraulically balanced in all components the required control accuracy and efficiency can be achieved. In Germany the hydraulic balancing process is required by law for new systems and when renovating existing systems. Providing evidence is thus obligatory. In order to...

Open the catalog to page 6
Manifold Technology - 7

Presetting diagram of (flow*) fine regulation valve for manifold 1“ *the fine regulating valve can also be installed in the return and the stop valve in the flow. fine regulation valve 3/8“ for manifold 1“ Presetting the fine regulation valve Detach black cap of lead seal, close the valve completely by means of the ventilating key. Read the requested presetting value from the diagram. Open the valve by turning corresponding to the quantity of turns. Remove the ventilating key, plug in the cap of lead seal and plumb, if required. Example To guarantee a flow of 150 l/h with a Δp value of 2000...

Open the catalog to page 7
Manifold Technology - 8

Presetting diagram of (flow*) fine regulation valve for manifold 1 1/4“ *the fine regulating valve can also be installed in the return and the stop valve in the flow. fine regulation valve 1/2“ for manifold 1 1/4“ Presetting the flow regulation valve: Close the valve completely. Remove the screw of the handwheel, but do not remove the handwheel. Screw in the presetting spindle clockwise in the valve spindle all the way to the stop. The valve is then completely blocked. Read the desired presetting value from the diagram. Hold the handwheel and screw the presetting spindle to the left, as...

Open the catalog to page 8
Manifold Technology - 9

APPLICATION APPLICATION = Heating/District Heating Heating/District Heating Overview Image Description Manifold 1“ profile pipe with flow meter and thermostatic valves Model 26080 l Manifold 1“ profile pipe with fine regulating valves and thermostatic valves Model 26040 l Manifold 1“ profile pipe with fine regulating valves and electrical actuators Model 26070 l Valve lower part with female thread Model 2726 /2326 10 Description Adjusting and ventilating tool Model 2727 Connector for manifold trunks with 1/2“ outflow Model 2204 Flow extension Piece Model P27400 / P24400 Manifold 1“ profile...

Open the catalog to page 9
Manifold Technology - 10

ready to connect and pressure tested 1“ profile pipe, outflow 3/4“ euro cone, valve distance 50 mm, with sealing end, vantilation valve, 3/8“ plug and soundabsorbing fastening elements. With stickers for marking the heating circuits. equipment flow: flow meter 0,5 - 2,5 l/min for adjusting the installation equipment return: thermostatic valves for manual regulation (retrofittable for electrical actuators) Item may differ from the picture. ready to connect and pressure tested 1“ profile pipe, outflow 3/4“ eurocone, valve distance 50 mm, with sealing end, vantilation valve, 3/8“ plug and...

Open the catalog to page 10
Manifold Technology - 11

ready to connect and pressure tested 1“ profile pipe, outflow 3/4“ eurocone, valve distance 50 mm, with sealing end, ventilating valve, 3/8“ plug and soundabsorbing fastening elements. With stickers for marking the heating circuits. equipment flow: integrated fine regulating valves for manual regulation equipment return: electric actuators 230 V Item may differ from the picture. MANIFOLD FOR RADIATOR CONNECTION ready to connect and pressure tested 1“ profile pipe, outflow 3/4“ eurocone, valve distance 50 mm, with sealing end, ventilating valve, 3/8“ plug and soundabsorbing fastening...

Open the catalog to page 11
Manifold Technology - 12

ready to connect and pressure tested 1 1/4“ profile pipe, outflow 3/4“ eurocone, valve distance 50 mm, with sealing end, vantilation valve, 1/2“ plug and soundabsorbing fastening elements. With stickers for marking the heating circuits. equipment flow: thermostatic valves for manual regulation (retrofittable for electrical actuators) equipment return: flow meter 1 - 4 l/min for adjusting the installation Item may differ from the picture. ready to connect and pressure tested 1 1/4“ profile pipe, outflow 3/4“ eurocone, valve distance 50 mm, with sealing end, vantilation valve, 1/2“ plug and...

Open the catalog to page 12
Manifold Technology - 13

MANIFOLD TRUNK outflow 3/8“ female thread one-sided made of profile pipe, inner diameter 30 mm, on both sides 1“ female thread, one side with sealing end 1“, hole distance 50 mm (other distances on request) Item may differ from the picture. MANIFOLD TRUNK outflow 1/2“ female thread one-sided made of profile pipe, inner diameter 30 mm, on both sides 1“ female thread, one side with sealing end 1“, valve distance 50 mm (other distances on request) Item may differ from the picture.

Open the catalog to page 13

All BEULCO GmbH & Co. KG catalogs and technical brochures