Drinking Water Hygiene. Drinking Water Sampling.

Drinking water hygiene and drinking water sampling - H Drinking water, as the most important food, occupies a high status in the european legislation. It is intended for human use and consumption and thus its particular protection is an obligation. The European Drinking Water Directive 98/83/EC and the German Drinking Water Ordinance stipulate the legal requirements for the special protection of drinking water. This means drinking water systems must be planned, built and operated in such a manner that hazards and illnesses are not caused by the installation. This applies to the complete water...

Dinking Water Hygiene / Drinking Water Sampling - H Sampling of Drinking Water The European Drinking Water Directive 98/83/EC and the German Drinking Water Ordinance stipulate the legal requirements for the special protection of drinking water. This means drinking water systems must be planned, built and operated in such a manner that hazards and illnesses are not caused by the installation. Current standards and regulations set by the Federal Environment Agency and the DVGW also deal with this issue. Maintaining an overview of all the regulations is often a challenge in and of itself. Often,...

Which Drinking Water Systems have to be tested? The Drinking Water Ordinance prescribes regular, systemic inspections for legionella for all public or commercially used high-duty systems in the terms of the DVGW Code of Practice W 551. The term 'systemic' makes clear that the inspection procedure does not involve the determination of a lack of legionella at all individual outlets, but rather a sample test to determine possible contamination with legionella in parts of the drinking water installation that can have an influence on a larger number of outlets, in particular in the central parts of...

Dinking Water Hygiene / Drinking Water Sampling - H Inspection points for drinking water sampling The selection of the representative inspection points is conducted by means of a visit or on the basis of the available documentation for the drinking water installation in coordination with the responsible public health department. The standards of the DVGW Code of Practice W 551 and the Federal Environment Agency must be observed. According to the recommendation of the Federal Environment Agency, the ‘inspection points are to be selected by personnel trained in hygiene issues (e.g. technical inspection...

Products for drinking water sampling Model 6100 Particularly for the sampling at the user‘s tap point (e.g. washbasin) BEULCO has developed the sampling valve for taking samples at the angle valve. The valve can be installed in new systems but also used for retrofitting existing systems. Advantages • easy installation between the angle valve and the wash basin armature via cone squeeze connection (10mm) • all parts that come in contact with drinking water are 100% lead-free • thermically and chemically desinfectable • rotable around 360° at 2 axes • valve can remain in the installation after...

made in Germany Drinking Water Hygiene / Drinking Water Sampling - H SAMPLING VALVE Model 6096 made of lead-free brass for sampling all chemical and microbiological parameters • rotable around 360° at two axes • chemically and thermically desinfectable/ deflagratable • easy installation • vertical sampling in all installation positions • lead-free body • incl. adapter to 3/8" male thread outflow 3/8" with squeeze connection 0 10 mm •

APPLICATION D • 1= Drinking water Wl • 1= Water ACTUATING KEY Model 6101 for sampling valve model 6100 Item may differ from the picture.

Drinking Water Hygiene / Drinking Water Sampling - H This box contains all necessary details for tapping samples of water 1 St. connecting reduction 1“ female x 1/2“ male thread 1 St. connecting reduction 3/4“ female x 1/2“ male thread 1 St. connecting reduction M 28 x 1 male x 3/4“ male thread 1 St. connecting reduction M 24 x 1 male x 3/4“ male thread 1 St. connecting reduction M 22 x 1 male x 3/4“ male thread 1 St. connecting reduction M 22 x 1 female x 3/4“ male thread 1 St. connecting reduction M 22 x 1 male x 1/2“ male thread 1 St. connecting reduction M 22 x 1 female x 1/2“ male thread...

APPLICATION D = Drinking water l W l = Water BEULCO CLEAN DISINFECTANT Environmentally friendly and risk-free disinfection of drinking water supply systems. Effective and powerful against: Legionellae, e-coli bacteria, coliform germs, pseudomonas, streptococci and salmonellae. Disinfectant on the basis of sodium hypochlorite: • sustainable • decomposes naturally by 100% • no dangerous good due to its composition • available: 20 l-canister or 1 l-spray bottle Item may differ from the picture. Information on the disinfection of drinking water distribution systems / standpipes Due to the frequent...