BEULCO water meter box catalogue
12Pages

DIFFERENT. WITH

The Water Meter Box With increasing frequency, new buildings and renovations of existing buildings are equipped without suitable rooms for house connections or utility rooms. A water meter box is thus an optimal and common alternative for the installation of a water meter facility. Using a box, the water transfer point is shifted from the inside of the building to the property boundary – in this way the water supplier can access the water meter at any time. The BEULCO water meter box with protection from frost is intended for the installation of water meter systems outside buildings. It is...

BEULCO Water Meter Box Characteristics Modular design The BEULCO water meter box is designed modularly and consists of a basic module, several top modules, a flexible one and a cover. The individual models are screwed together in order to be secured during transport. The basic module is already prepared and equipped with the conduits necessary for the connection as well as with the water meter system. The basic module can be individually increased by top modules. The final module is adjustable by 16 cm in height and inclination. Using the rectangular cover for load classes B125 and C250,...

Used materials The box body consists of a high-quality polypropylene (PP) cover with a polystyrene insulation inside. The construction of the components provides a special stability of the whole body. The box covers are made of polypropylene with a load height up to 1.5 tons or of gray cast iron with load heights up to 12.5 tons and 25 tons. The connecting conduits are made of plastic proved by DVGW. All brass components with contact to drinking water are made of alloys according to the European Drinking Water Directive 98/83/EC and the valuation basis of German Federal Environment Agency...

BEULCO Water Meter Box Connections The connecting conduits in the basic versions are equipped with pipes, diameter 32 (DN25), proven by DVGW. Both conduits consist of a pipe instead of a thread connection and can be joined comfortably by means of various PE pipe connectors, either by screwing, plugging-in or welding. Box covers - referring to DIN 1229 and DIN EN 124 Load class A15 This class comprises green areas and traffic areas which are used exclusively by pedestrians and cyclists. The maximum load limit is 1,5 tons. Load class B125 For the use in sectors with load class B125, a...

Norms and Regulations Assembly, installation and execution of the necessary activities have to comply with the legal regulations of the European Drinking Water Directive 98/83/EC, the accident prevention regulations and all applicable standards and regulations including the generally accepted technical regulations. The operating instructions of the appropriate clients or the implementing companies have to be respected, also the RSA 95 “Guidelines for safety of working places at streets”. Please note in particular: • DIN EN 805: „Water supply – requirements to water supply systems and their...

BEULCO Water Meter Box Preparing Activities and placing the box Before application, the water meter box has to be checked for damages or impurity. A damaged box or a damaged component cannot be used. The water meter box is delivered ready to use and can be placed in the prepared trench. The trench bottom must be flattened as planned and pre-sealed, so that the box stands vertical and even. While placing, please mind the flow direction of water. Connection of conduits The water-bearing pipelines have to be placed directly to the box outside. Thus no further thread connections are necessary....

Installation during temporary ground level Particularly with new buildings it is a challenge to adjust the water meter box to the later and final ground level. Often, the final surface layout and the height of the water meter installation is not yet certain. The BEULCO water meter box offers support with simple means. As a temporary solution, you can place the box at the designated position. Let the completing module and cover on the lowest level and fill the trench as described. During later work on the ground surface (e.g. subsequent pave work), the module can easily be revealed and...

WATER METER BOX Model 69000 completely prepared for water meter Qn 2,5 (before Q3 = 4), without cover consisting of: • basic module with connecting circuits 32 mm • 3, 4 or 6 top modules (depending on the version) • inner insulation • no cover • Quickturn inlet/outlet valve 1" with non-return valve in front • bridging pipe Item may differ from the picture.

APPLICATION D • 1= Drinking water Wl • 1= Water Item may differ from the picture. Item may differ from the picture. Please order two items each. Compression fitting with loose insert pipe - product group A2 Coupling standard or reduced Plug-in connector without insert pipe - product group A11 Coupling standard or coupling with reduction set Compression fitting without insert pipe - product group A3 Coupling standard or reduced Compression fitting BEULCO BlackLine - product group A4 Coupling standard or reduced Installation instruction see page 8/9 11

info@beulco.de www.beulco.de