BEULCO wall ducts
16Pages

Wall Ducts.

THROUGH THE WALL.

BEULCO wall durcts ensure realiable sealings between supply or disposal conduits and the protection pipes of the wall ducts. The wall ducts are leakproofed against water, pressing ground water and straying gas. • Standard length 450 mm (wall thickness 400 mm) • Pipelines (water) • Special lengths from 150 up to 2000 mm • Drinking water • More lengths on request • Cables Material: • Plastic • Steel Variations: • Ridig wall ducts • Rigid wall ducts with connector • Rigid wall ducts with elbow connector • Flexible wall ducts (connection set) Advantages •...

| made ■ in | Germany Instructions for subsequent installation of a wall duct with the installation set 1. Remove union nut, slide ring and seal from the wall duct. 2. Push the flange onto the wall duct and firmly screw the union nut without slide ring and seal. 3. Put the wall duct with flange concentrically into the core hole or the breakthrough and mark the bore-holes (inside house). 4. Remove the flange with the wall duct and drill the fastening holes (010 mm). 5. Insert the dowels, mount the wall duct with flange and cellular seals. 6. Put in the ventilation hose and seal the core hole...

BEULCO Overview Image

| made ■ in | Germany WALL DUCT Model 9000 for all kinds of continuous water bearing pipes and for cables protecting pipe made of plastic (standard length = 450 mm - more lengths on request) Item may differ from the picture.

WALL DUCT Model 9000 for all kinds of continuous water bearing pipes and for cables protecting pipe made of plastic (standard length = 450 mm - more lengths on request) Item may differ from the picture.

made in Germany EXTENSION PART Model 9015 made of plastic, length: 150 mm Item may differ from the picture.

APPLICATION D • = Drinking water] w| • = Water C • = Cabel REDUCING SOCKET Model 9050 made of plastic for wall duct model 9000 Item may differ from the picture.

| made ■ in | Germany CONNECTING SET Model 90904 for spiral hose model 90905 to create a flexible wall duct consisting of: 2 gland fittings model 9090 and 2 hose clips made of stainless steel model 90906 Item may differ from the picture. GLAND FITTING Model 9090 made of plastic, with hose nozzle Item may differ from the picture. PLASTIC SPIRAL HOSE Model 90905 50 m per roll Item may differ from the picture. HOSE CLAMPS Model 90906 width: 9 mm; hose clamps made of stainless steel, screw made of zinc-coated steel. For spiral hose model 90905 inner diameter of required hose (mm)

APPLICATION D • = Drinking water] w| • = Water C • = Cabel WALL DUCT Model 9100 with connector with male thread of product group A1 protecting pipe made of plastic standard length 450 mm Instructions for subsequent installation see page 4

| made ■ in | Germany WALL DUCT Model 910 with connector with male thread of product group A1 protecting pipe made of steel standard length 450 mm

APPLICATION D • = Drinking water] w| • = Water C • = Cabel INSTALLATION SET Model 909020 for wall duct model 9000, for later installation (e.g. in case of core hole bores) consisting of: 1 flange 1 cellular seal 3 screws with plain washer and pin 1 plastic plug for closing the feed opening 1 air vent hose Item may differ from the picture. Instructions for subsequent installation see page 4

info@beulco.de www.beulco.de BEULCO® GmbH & Co. KG Kolner Str. 92 Postbox 1 20 Phone +49 2722 695-0