BeScan Lab
7Pages

BeScan Lab Stability Analyzer STABILITY EXCELLENCE WITHIN REACH

BeScan Lab From Raw Materials to Finish BeScan Lab, the versatile, sensitive, and reliable stability analyzer based on Static Multiple Light Scattering (SMLS) technology, is widely used in the formulation development and product quality control. It accommodates a wide range of sample concentrations up to 95% v/v and types such as emulsions, suspensions, and foams, with temperature scanning capabilities reaching up to 80 °C. BeScan Lab provides both qualitative analysis and quantification of destabilization, helping you monitor long-term product stability and achieve optimal shelf life....

ADVANCED MEASUREMENT PRINCIPLE Static Multiple Light Scattering Static Multiple Light Scattering (SMLS) is an optical technique used to directly characterize native concentrated liquid dispersions. This technique emits light into the sample, where it is scattered multiple times by particles or droplets before being detected. • Versatile measurement No limitations on color or viscosity, and suitable for a wide range of samples from low to high concentrations (up to 95% v/v). BeScan Lab applies SMLS using an 850 nm LED as light source, with detectors set at 0° for capturing transmitted light...

DEDICATED SOFTWARE for Superior Qualitative and Quantitative Stability Outcomes Qualitative Analysis - Identification of Destabilization Quantitative Analysis - Instability Index for Rating Guide BeScan Lab utilizes near-infrared light and a precise 20-micrometer spatial resolution to detect early-stage destabilization phenomena like phase separation, sedimentation, creaming and aggregation (flocculation, coalescence, and coagulation) well before they are visually observable. BeScan Lab provides the instability index (IUS), which quantifies the stability of dispersions. The calculation...

VERSATILE APPLICATIONS for Diverse Real World Cases Beer Foam Stability Ibuprofen Suspension Redispersion Stability Beer foam stability is key to quality and freshness. BeScan Lab analyzes this stability by capturing changes in transmitted signals, revealing the impact on foam transmission, drainage rate, and the progression of the instability index. These insights aid in formulating the best beer recipe for market success. Ibuprofen suspension is a widely used pain reliever whose active ingredients may settle after storage. Stability after redispersion is strongly associated with its...

COMPREHENSIVE STABILITY ANALYSIS SOLUTIONS BeScan Lab Monitoring product stability throughout the entire product lifecycle. Whether used independently or in combination with other instruments, BeScan Lab ensures product quality, process stability, and safety. Bettersizer S3 Plus BeNano Series Nanoparticle size Size distribution Zeta potential Rheological properties Particle size Particle size distribution 0.02 μm - 2,600 μm Powder density Liquid density Slurry solid content Particle size Particle size distribution 0.1 μm - 1,000 μm Internal Factors Particle size Particle size distribution...

Specifications Measurement principle SMLS (Static Multiple Light Scattering) Detection angle Light source Scan step Scan height Maximum volume fraction* Measurement range of particle size Temperature control Sample volume Measurement mode Regular / Fixed point / Temp. trend Power supply * Sample and sample preparation dependent www.bettersizeinstruments.com info@bettersize.com Visit Our BeScan Lab Site: Bettersize Instruments Ltd. Address: No. 9, Ganquan Road, Jinquan Industrial Park, Dandong, Liaoning, China Postcode: 118009 Tel: +86-755-26926582 Visit Our Official YouTube Channel:...