Mechanical pullers www.begaspecialtools.com

Dismounting Mechanical pullers BETEX MSP   3 BETEX MP10/11   4 BETEX MP15/16   5 BETEX MP20   6 BETEX MP25 

MECHANICAL PULLERS BETEX MSP 2/3-arm pullers, self-centering Prevent damage to shafts and spindles, use BETEX 625/630 shaft protectors. BETEX MSP Safe and easy dismounting of bearings, couplings, rings, etc. • Ergonomic design, easy to operate by one person. • Prac�cal! Self-centering 2-arm or 3-arm puller, including locking. Easy to convert, can be used in any posi�on. • Safe! The arms slide inwards or outwards simultaneously. Bending or deflec�ng is impossible. • Economical! 2-arm or 3-arm puller combina�on, 2 pullers for the price of one. • Strong! The harder the pulling force, the �ghter the...

MECHANICAL PULLERS BETEX MP10/11 universal 2-arm pullers Prevent damage to shafts and spindles, use BETEX 625/630 shaft protectors. BETEX MP10/11 Simple, handy 2-arm puller for external grip. Suitable for dismantling pulleys, bearings, rings and fans of electric motors. During dismantling, the arms cannot slip because they are pressed against the puller bridge. The greater the pressing force, the �ghter the arms grip on the workpiece! These pullers are also available with extended arms for even greater capacity. External puller 2-arms Available as MP10 in 9 standard sizes Available as MP11 in...

MECHANICAL PULLERS BETEX MP15/16 universal 2/3-arm pullers Prevent damage to shafts and spindles, use BETEX 625/630 shaft protectors. BETEX MP15/16 Simple, handy 2/3-arm puller for parts gripped externally like pulleys, bearings, rings, etc. Suitable for removing fans from electric motors. During opera�on, the arms cannot slip because they are pressed against the cross bar. The harder the pulling force, the �ghter the jaws grip around the workpiece. These pullers are also available with extended arms for even larger capacity. External puller 2- or 3-arms Available in 9 standard sizes Available...

MECHANICAL PULLERS BETEX MP20 mechanical 2-arm pullers Prevent damage to shafts and spindles, use BETEX 625/630 shaft protectors. BETEX MP20 This 2-arm puller is extremely well-suited to applica�ons involving the extrac�on of bearings, rings, sprockets, couplings etc. The jaws are forged and therefor extra strong. Reversal of the arms makes internal dismantling also possible. The self-locking system guarantees that the arms will not deflect. External and internal puller 2-arms, reversible Self-locking Also available as set MP20000 with a display including 5 sizes: MP20080, MP20115L, MP20155, MP20195,...

MECHANICAL PULLERS BETEX MP25 universal 2-arm bearing puller Prevent damage to shafts and spindles, use BETEX 625/630 shaft protectors. BETEX MP25 These bearing pullers are par�cularly suitable for extrac�ng bearings, bearing rings, gears, discs etc. for �ght or difficult to reach areas. First lateral force is applied to grip the part with the sharp jaws. These grip on the radius of the outer ring. Due to the special construc�on, the arms cannot move during use. You prevent damage and save �me. External puller 2-arms For �ght spaces Special jaw construc�on for extra strong grip

MECHANICAL PULLERS BETEX MP26 2-arm pullers, cross arms with tapered claws Prevent damage to shafts and spindles, use BETEX 625/630 shaft protectors. BETEX MP26 This puller is par�cularly suitable for extrac�ng bearings, pinions, pulleys etc. for �ght or difficult to reach areas. External puller 2-arms For a wider spread and depth, puller arms can be assembled in variable posi�ons Easy to handle, cross arm puller

MECHANICAL PULLERS BETEX MP30 mechanical 2/3-arm pullers, self-centering Prevent damage to shafts and spindles, use BETEX 625/630 shaft protectors. BETEX MP30 The 2/3 arms of these pullers adjust themselves simultaneously and symmetrically, inwards, or outwards. Work efficient with perfect posi�oning of the arms. The arms cannot bend or deflect. The higher the pulling force, the �ghter the grip of the arms. These pullers are also available with extended arms for even larger capacity. External puller 2- or 3-arms Self-centering Available in 6 standard sizes Available in 3 sizes with extended arms...

MECHANICAL PULLERS BETEX MP40 4-arm ball bearing puller BETEX MP40 These four-arm bearing pullers have been specially developed to extract ball-bearings from casings and sha�s simultaneously. For when there is no free space internally or externally. The arms grip the bearing between the inner- and outer ring. For extra grip and the desired leverage effect, a supplied ring can be used. The blue numbered bearings are dismantled without the ring. Used for the 6000, 6200, 6300 and 6400 bearing series. • Internal puller • 4-arms • Available as set MP40900 in handy case with 3 sizes: MP40100, MP40200,...

MECHANICAL PULLERS BETEX MP50 expanders, countersupports and slide hammers BETEX MP50 This special expander system has been developed to facilitate rapid and effec�ve dismantling under difficult condi�ons, e.g., in ‘blind holes’. The mul�ple adjustable jaws (up to 6) ensure the correct grip from behind the bearing. Deflec�on is impossible. The counter supports are universal, which means that the arms can be twisted in any direc�on to find the best point of pressure. The larger types are equipped with a conical puller adapter in the expander, which prevents fric�on when �ghtening the screw. Bearings,...

BETEX MP50350 Used in combina�on with internal expander puller. • Stroke of 250 mm • Connec�on thread 1/2” UN20h A major advantage of the slide hammer is that it can be used independently of any housing. No pressure points are required. A�er posi�oning the inner expander puller, the slide hammer is screwed on. Expander MP50507 to MP50811 Counter support type / Art. no. Counter support Slide hammer type / Art. no. Set 1: MP51245S - including slide hammer - 3,6 kg Set 2: MP51245T - including counter support - 3,7 kg Set 3: MP50537S - including counter support - 3,6 kg Set 4: MP50537T - including...