UltiMist

Product catalog summary

Specifications:
The document provides specifications for misting nozzles, detailing the pipe size, connection type, nozzle number, spray angle, and material. The nozzles are available in both NPT and BSP connections, with options for male or female fittings. The standard material for metal nozzles includes a 416 stainless steel tip and a brass adapter/body, while plastic nozzles are made entirely of polyacetal.

Flow Rates:
Flow rates are provided in gallons per hour (GPH) at various PSI levels for different nozzle models. For metal nozzles, flow rates range from 0.37 to 16.4 GPH, while plastic nozzles range from 0.63 to 8.5 GPH. The flow rate is calculated using the formula: Flow Rate (GPH) = K √ PSI.

Design Features:
Metal nozzles feature a 416 stainless steel tip, brass body, and are available in 1/8" and 1/4" sizes with male or female connections. They also include an integral 100 mesh strainer. Plastic nozzles are constructed entirely of plastic with a 1/8" male connection.

Spray Characteristics:
The nozzles produce a very fine, fog-like mist with a high number of droplets under 60 microns. The spray pattern is a hollow cone with a medium angle.

Dimensions:
Metal nozzles have dimensions of 1.88 inches (48 mm) in length and hex sizes of 0.75 inches (19 mm) and 0.63 inches (16 mm). Plastic nozzles measure 0.86 inches (22 mm) in length with a hex size of 0.48 inches (12 mm). The adapter uses a 9/16-24 UNEF thread.

Additional Notes:
Spray angle performance varies with pressure, and BETE should be contacted for specific data on critical applications.

Catalog excerpts

Misting Nozzles DESIGN FEATURES Metal: • 416 Stainless Steel tip • Brass body • 1/8" and 1/4" sizes • Male or female connections • Integral 100 mesh strainer Plastic: • All plastic construction • 1/8" male connection Plastic Nozzle SPRAY CHARACTERISTICS • Very fine, fog-like mist • Produces high number of droplets under 60 microns Spray pattern: Hollow Cone Medium angle Flow rates: Metal: 0.37 - 16.4 gph Plastic: 0.63 - 8.5 gph Dimensions are approximate. Check with BETE for critical dimension applications. TO ORDER: specify pipe size, connection type, nozzle number, spray angle, and material. UltiMist Metal Flow Rates and Dimensions Hollow Cone, Medium Spray Angle, 1/8" and 1/4" Pipe Sizes NPT, BSP Male or Female Pipe Nozzle Size Number UM37M 1/8 UM50M UM75M or UM100M UM150M 1/4 UM200M UM250M UM300M Flow Rate (GPH) = K √ PSI Standard Material: 416 Stainless Steel Tip, Brass Adapter/Body UltiMist Plastic Flow Rates Hollow Cone, Medium Spray Angle, 1/8" Pipe Size NPT Male Pipe Size GALLONS PER HOUR @ PSI Nozzle Number Flow Rate (GPH) = K √ PSI Standard Material: Polyacetal Spray angle performance varies with pressure. Contact BETE for specific data on critical application

Open the catalog to page 1