TurboMix® Eductor Mixing Nozzle DESIGN FEATURES • Effective, economical way to circulate liquids in closed or open tanks • No moving parts • Inherently clog resistant • Requires minimal maintenance • Nozzle operation creates multiplying effect on fluid flow • The volume of discharge liquid will be 3-5 times greater than the motive liquid pumped SPRAY CHARACTERISTICS • Cone-shaped plume Flow rates: 7 to 3180 gpm (motive) Dimensions are approximate. Check with BETE for critical dimension applications. TurboMix in Molded Plastic ® TurboMix K Factor Number Motive Flow Rate GALLONS PER MINUTE @ PSI* 10 PSI Standard Material: Glass-filled Polypropylene. *PSI = supply pressure at the TurboMix minus the pressure in the tank TurboMix® in Metal Motive Flow Rate NPT or BSP Connection Size TurboMix K Factor Number Call for the name of your nearest BETE representative. SPECIAL PURPOSE Motive Flow Rate (GPM) = K √ PSI *PSI = supply pressure at the TurboMix minus the pressure in the tank Standard Materials: Brass (up to 3", inclusive), Carbon Steel, 316 Stainless Steel.