FULL CONE Wide Range of Flows and Angles DESIGN FEATURES SPRAY CHARACTERISTICS • The original spiral nozzle invented by • Wide range of flow rates and spray angles BETE and continuously improved! • Fine atomization • High energy efficiency Spray patterns: Full Cone. • One-piece/no internal parts For Hollow Cone, see page 45 • Clog-resistant performance Spray angles: 50° to 180° • High discharge velocity Flow rates: 2.26 to 10700 l/min • Male connection standard; female (Higher flow rates available) connection available by special order Available with FM approval: N series (page 106), 1/4" TF8 NN, FCN in brass, 1/2" TF24-150 in multiple materials Dimensions are approximate. Check with BETE for critical dimension applications TF Full Cone Flow Rates and Dimensions Full Cone, 60° (NN), 90° (FCN or FFCN), 120° (FC or FFC), 150° and 170° Spray Angles, 1/8" to 4" Pipe Sizes, BSP or NPT Male Available Pipe Nozzle Spray Angles K Size Number 60° 90° 120° 150°170° Factor PTFE not recommended at pressures above red line Metal ONLY at pressures above green line Approx. (mm) Wt. (g) Free Dim. (mm) for 60° 90° Orif. Pass Metal Only* 120° Dia. Dia. A B C Metal Plas. TO ORDER: specify pipe size, connection type, nozzle number, spray angle, and material. Flow Rate ( ) = K √ bar *Dimensions are for bar stock, cast sizes may vary. **60° nozzles slightly longer; call BETE for details Standard Materials: Brass, 316 Stainless Steel, PVC, Polypropylene, and PTFE Three turn nozzles