DESIGN FEATURES • The original spiral nozzle invented by BETE and continuously improved! • High energy efficiency • Provided with required filter • Clog-resistant performance • High discharge velocity SPRAY CHARACTERISTICS • Fine atomization Spray patterns: Full Cone Nominal spray angles: 60° and 90° Flow rates: 11.0 to 19.0 L/min 0.92 to 5.03 gpm COVERAGE DIAMETER COVERAGE WITH NOZZLE INSTALLED VERTICALLY DOWN TF8NN, 60° Nominal Spray Angle 50 PSI TF8FCN, 90° Nominal Spray Angle 150 PSI Measured Spray Angle Measured Spray Angle Measured Spray Angle Measured Spray Angle Measured Spray Angle Measured Spray Angle TO ORDER: specify pipe size, connection type, nozzle number, spray angle, and material. Dimensions are approximate. Check with BETE when nozzle dimensions are critical. TF Full Cone Flow Rates and Dimensions LITERS PER MINUTE @ BAR Male Pipe Size Nozzle Number Available Nominal Spray Angles Male Pipe Size Nozzle Number Available Nominal Spray Angles The included filter has a maximum opening size of 0.047” (1.2 mm).