Abrasion Resistant DESIGN FEATURES • Cobalt Alloy 6 or RBSC ceramic parts in high-wear areas • High energy efficiency • No internal parts • Clog-resistant • Male and female connections • Flanged and special connections available as required SPRAY CHARACTERISTICS • Fine atomization Spray pattern: Full Cone (Hollow Cone available by special order) Spray angles: 90° and 120° standard Flow rates: 0.5 to 3320 gpm (Higher flow rates available) Dimensions are approximate. Check with BETE for critical dimension applications. ST Flow Rates and Dimensions Full Cone, 90° (FCN or FFCN) and 120° (FC or FFC) Spray Angles, 1/4" to 4" Pipe Sizes 3-piece Male or Female Pipe Size *Parallel threads only Flow Rate (GPM) = K4PSI 1Th re e turn nozzles Standard Materials: Base and Caps - 316 Stainless Steel; Tip - Cobalt Alloy 6 or RBSC Ceramic. (RBSC not available on nozzle numbers ST6 - ST32). Spray angle performance varies with pressure. Contact BETE for specific data on critical applications.