NOZZLES FOR SPRAY DRYING Manual No. 500.3.TD/L BETE Introduces the New Twist & DryTM, a Breakthrough in Spray Dryer Nozzle Maintenance

Choose The BETE Twist & Dry BETE Has Been Developing Specialized Industrial Nozzles for Over 50 Years BETE's success is built on its ability to engineer its nozzle designs to deliver the spe- cific spray performance required for the most exacting applications. The BETE Twist & Dry™ is one of over 20,000 nozzle designs, engineered with the same precision and innovation as the nozzles we make for the space shuttle and nuclear power plants. Responsiveness to customer needs has led us to create designs that provide better performance, longer nozzle life, and greater ease of use. The BETE Twist &...

place during swirl unit fluid passages

Relationship of Twist & Dry™ Nozzle Design to Spray Characteristics and Performance Flow Rate vs. Pressure Orifice Diameter, inches Orífice Diameter, inches

Twist & Dry™ Hollow Cone DESIGN FEATURES • Patent pending locking mechanism for quick and easy change-out and • Female threaded or butt weld pipe • Easy Assembly, no special tools • Orifice size: 0.034" through 0.157" • Interchangeable swirl and orifice discs for variable patterns and flow rates SPRAY CHARACTERISTICS • Hollow Cone TYPICAL APPLICATIONS Spray Drying Food, Chemicals, and Cutaway view showing lugs unique locking TD Flow Rates and Dimensions Hollow Cone, 50° to 80° Spray Angles, 1/4", 3/8", 1/2"and 3/4" Pipe Size NPT, BSP or Welded Flow Rate (GPH)= K PSI Standard Materials: Stainless...

TD Flow Rates and Dimensions Hollow Cone, 50° to 80° Spray Angles, 1/4", 3/8", 1/2" and 3/4" Pipe Size NPT, BSP or Welded Standard Materials: Stainless Steel, Tungsten Carbide. Other materials available

Twist & Dry™ Components & Options Carrier 11 (CHI) - without lugs Carrier 5 (CI5) - without lugs Carrier 12 (CU 2) - without lugs To Order: Spray Set-up Number pipe size swirl number carrier style omit for TDL, or standard carrier, model #2 omit for TDL or if pressure is less than or equal to 3,500 psi (241 bar) 7K if pressure is greater than 3,500 psi and less than or equal to 7,000 psi; needs PEEK backup ring 10K if pressure is greater than 7,000 psi and less than or equal to 10,000 psi; needs PEEK backup ring + Duplex 2205 carrier material omit if temperature is less than or equal to I if...

Twist & Dry™ Low Flow Hollow Cone DESIGN FEATURES • Patent pending • Locking mechanism for quick and easy • 2 piece body for easy maintenance • Lower flow rates than TD series • Female threaded or butt weld pipe • Orifice size: 0.018" through 0.058" • Interchangeable swirl and orifice discs for variable patterns and flow rates SPRAY CHARACTERISTICS • Hollow Cone TDL Flow Rates and Dimensions Hollow Cone, 70° to 75° Spray Angles, 1/4", and 3/8" Pipe Size NPT, BSP or Welded Standard Materials: Stainless Steel, Tungsten Carbide. Other materials available

TDL Flow Rates and Dimensions Hollow Cone, 70° to 75° Spray Angles, 1/4" 3/8", 1/2" and 3/4" Pipe Size NPT, BSP or Welded Standard Materials: Stainless Steel, Tungsten Carbide. Other materials available

The Easiest Assembly of Any Spray Drying Nozzle Available Today 1. Place carrier o-ring into carrier 2. Place orifice disc into carrier. The polished radius side of the disc should be facing you when properly positioned. 3. Place swirl chamber into carrier. Hold swirl chamber with screwdriver slot facing you. Align flat side of swirl with lugs in carrier. Drop into carrier. . The swirl chamber is now ready to be "locked" into the carrier. 5. Use flathead screwdriver, with a assembly. Components remain slight push the swirl chamber can be properly positioned regardless of twisted to 'lock' beneath...

email: [email protected]