DESIGN FEATURES • A two-fluid nozzle using any gas as the atomizing fluid • Three-stage atomization for highest performance • Designed for high reliability in extremely hostile environments • Efficient design reduces compressed air consumption SPRAY CHARACTERISTICS Spray patterns: Full Cone and Flat Fan Spray angles: 20°, 60°, 90° (Other angles available by special order) Flow rates: 0.33 to 26 gpm 1 1/2” SA (Set-up #) - A - 00 Dimensions are approximate. Check with BETE for critical dimension applications. SpiralAir Spray Set-up, Spiral Tip and Dimensions Spray Spiral Pipe Set-up Tip Spray Size Number No. Angle TO ORDER: specify pipe size, body style, spray set-up #, hardware and mounting assemblies, and material. Narrow Round Wide Round Pipe Size Spray Type Approx. Free Pass. Dia. (in.) Narrow Round Wide Round Larger sizes and flow rates available upon request. Wide Round Narrow Round Wide Round Offset tip angles Standard Materials: 316 Stainless Steel with optional Cobalt Alloy 6 wear components. Spray angle performance varies with pressure. Contact BETE for specific data on critical applications.

The SpiralAir can be configured to fit any installation requirement. The examples shown are just a few of the custom assemblies available. For more information, contact BETE Applications Engineering. A guide with additional engineering data about the SpiralAir series is available on request. 1” SA with Right Angle Adapter 1” SA (Set-up #) - B -00 1 1/2” SA with Right Angle Adapter 1 1/2” SA (Set-up #) - B -00 Lance Assembly F 1” SA (Set-up #) - F -10 Lance Assembly C 1” SA (Set-up #) - C -10 Lance Assembly B 1” SA (Set-up #) - B -10 SpiralAir Set-up Flow Rates Narrow, Wide and Flat Fan Patterns...