FULL CONE Snap Release Nozzle System DESIGN FEATURES • Nozzles can be quickly changed and aligned by hand without tools • Clamp-on adapter fits any style nozzle • Quick set-up system features special “Snap-in” tips • Polypropylene, resistant to most acids and alkalies • Double clamp base or adapter available for higher pressure operation SPRAY CHARACTERISTICS • Quick Set-up System can be provided with fan, hollow or full cone spray tips • Full 45° alignment of spray without tools More SF Nozzle Systems: Hollow Cone: page 48 Flat Fan: page 64 Double Clamp Adapter with Spiral Nozzle Flow rates: 0.35 to 15.8 gpm Spray angles: Full Cone: 35°, 65°, 80° “SNAP-IN” Full Cone Nozzle Tip A 80° Full Cone SingleClamp Base Retainer Cap “SNAP-IN” Threaded Swivel Ball Available with 1/8”, 1/4”, 3/8”, 1/2” NPT or BSP Female threads CLAMP-ON ADAPTER • Available for 1”, 1-1/4”, 1-1/2” and 2” pipe. • Available with 1/8”, 1/4”, 3/8”, 1/2” NPT female threads; or 1/8” BSP female threads • Available with single or double clamp. • TO ORDER ADAPTER Specify: Pipe Size, thread size, thread type, number of clamps, materials. Double-Clamp Adapter Single-Clamp Adapter Available Spray Angle Body Color blue red purple green Flow Rate (GPM) = K(PSI) 0.48 Standard Materials: Polypropylene, 302 Stainless Steel clamp, EPDM seal. Optional Materials: Viton seal. NOTE: NOTE: Drill 21/32” hole in pipe to install SF. Nozzle Number Call for the name of your nearest BETE representative. SF Flow Rates and Dimensions SF Full Cone 35°, 65° and 80° Spray Angles 1”, 1-1/4”, 1-1/2” and 2” Pipe Sizes Maximum recommended working pressures for SF assemblies: with single clamp, 70 psi for 1” pipe; 50 psi for 1-1/4

HOLLOW CONE Snap Release Nozzle System DESIGN FEATURES • Nozzles can be quickly changed and aligned by hand without tools • Clamp-on adapter fits any style nozzle • Quick set-up system features special “Snap-in” tips • Polypropylene, resistant to most acids and alkalies • Double clamp base or adapter available for higher pressure operation SPRAY CHARACTERISTICS • Quick Set-up System can be provided with fan, hollow or full cone spray tips • Full 45° alignment of spray without tools More SF Nozzle Systems: Full Cone: page 31 Flat Fan: page 64 Flow rates: 0.35 to 15.8 gpm Spray angles: Fan: 40°,...

Snap Release Nozzle System DESIGN FEATURES • Nozzles can be quickly changed and aligned by hand without tools • Clamp-on adapter fits any style nozzle • Quick set-up system features special “Snap-in” tips • Polypropylene, resistant to most acids and alkalies • Double clamp base or adapter available for higher pressure operation SPRAY CHARACTERISTICS • Quick Set-up System can be provided with fan, hollow or full cone spray tips • Full 45° alignment of spray without tools More SF Nozzle Systems: Hollow Cone: page 48 Flat Fan: page 64 Flow rates: 0.35 to 15.8 gpm Spray angles: Fan: 40°, 50°, 65°,...