DESIGN FEATURES • High energy efficiency • No whirl vanes or internal parts • 1/8” or 1/4” male connection • Standard: 100-mesh 316SS screen • Optional: 200-mesh 316SS screen • Optional: 20 micron paper filter • Optional: 70 micron polypropylene filter • Optional welded pin and optional safety wire hole SPRAY CHARACTERISTICS • Finest fog of any direct pressure nozzle Spray pattern: Cone-shaped Fog Spray angle: 90°. For best 90° pattern operate nozzle at or above 60 psi Flow rates: 0.013 to 1.4 gpm PJ with polypropylene filter Dimensions are approximate. Check with BETE for critical dimension applications. PJ Flow Rates and Dimensions Impingement, 90° Spray Angle, 1/8" or 1/4" Pipe Sizes Approx. Male Pipe Nozzle K Size Number Factor Approx. Coverage Orifice (inches) Flow Rate (GPM ) = K √PSI Standard Materials: Brass, 303 Stainless Steel and 316 Stainless Steel. Spray angle performance varies with pressure. Contact BETE for specific data on critical applications. Call for the name of your nearest BETE