FULL CONE NCK Full Cone/Narrow Angle Injector SPRAY CHARACTERISTICS • Coarse and extremely hard driving spray with even distribution Spray pattern: Full Cone Spray angles: 15°, 20° and 30° Flow rates: 7.1 to 1220 gpm (Special flow rates available) DESIGN FEATURES • Narrow spray angles • High velocity • Male and female connections • Flanged connections available Plastic Metal Dimensions are approximate. Check with BETE for critical dimension applications. NCK Flow Rates and Dimensions Full Cone, 15°, 20° and 30° Spray Angles, 3/4" to 6" Pipe Sizes Male or Female Pipe Size GALLONS PER MINUTE @ PSI Nozzle Number Dimensions for Metal Only (in.) A B C Standard Materials: Brass, 316 Stainless Steel, PVC, Polypropylene and PTFE. NOTE for PTFE nozzles: if operating temperature is to exceed 300°F, or the operating pressure is to exceed the values listed in the table above, please contact BETE Applications Engineering for assistance. Spray angle performance varies with pressure. Contact BETE for specific data on critical applications. Call for the name of your nearest BETE representative.