Hollow Cone/Narrow HOLLOW CONE Angle Injector DESIGN FEATURES • Narrow spray angles • High velocity • Male and female connections • Flanged connections available • Available in plastic and metal alloys SPRAY CHARACTERISTICS • Spray is coarse and extremely harddriving Spray pattern: Hollow Cone Spray angles: 15°, 20° and 30° Flow rates: 7.1 to 1220 gpm (Special flow rates available) Metal Dimensions are approximate. Check with BETE for critical dimension applications. NCJ Flow Rates and Dimensions Hollow Cone, 15°, 20° and 30° Spray Angles, 3/4" to 6" Pipe Sizes Male or Female Pipe Size Nozzle Number GALLONS PER MINUTE @ PSI K Factor Dimensions for Metal Only (in.) A B C Standard Materials: Brass, 316 Stainless Steel, PVC, Polypropylene and PTFE. NOTE for PTFE nozzles: if operating temperature is to exceed 300°F, or the operating pressure is to exceed the values listed in the table above, please contact BETE Applications Engineering for assistance. Spray angle performance varies with pressure. Contact BETE for specific data on critical applications. Call for the name of your nearest BETE representativ