FULL CONE Threaded Connection/Plastic Material DESIGN FEATURES • Complete line of full cone nozzles made of plastic • Male and female connections • Flanged connection available in larger models—see NCFL (p. 38) • For metal alloy nozzles, refer to MaxiPass (pp. 26, 27), SC (pp. 32, 33), or TC (p. 39) Series SPRAY CHARACTERISTICS Spray pattern: Full Cone with uniform distribution. For square patterns, please contact BETE. Spray angles: 60°, 90°, and 120° standard Flow rates: 2.01 to 2150 gpm (Higher flow rates available) Dimensions are approximate. Check with BETE for critical dimension applications. NC Flow Rates and Dimensions Full Cone, Narrow 60°(N), Medium 90°(M) and Wide 120° (W) Spray Angles, 3/4" to 6" Pipe Sizes Male or Female Pipe Size TO ORDER: specify pipe size, connection type, nozzle number, spray angle, and material. Nozzle Number Standard Materials: PVC, Polypropylene, and PTFE. NOTE for PTFE nozzles: if operating temperature is to exceed 300°F, or the operating pressure is to exceed the values listed in the table above, please contact BETE Applications Engineering for assistance. Spray angle performance varies with pressure. Contact BETE for specific data on critical applications. Approximate Wt. Dimensions (in.) (oz.) A B C D Male

FULL CONE Dimensions are approximate. Check with BETE for critical dimension applications. NC Flow Rates and Dimensions Full Cone, Narrow 60° (N), Medium 90° (M) and Wide 120° (W) Spray Angles, 3/4" to 6" Pipe Sizes Male or Female Pipe Size GALLONS PER MINUTE @ PSI Nozzle Number Approx. Free Pass. Dia. (in.) Standard Materials: PVC, Polypropylene and PTFE. NOTE for PTFE nozzles: if operating temperature is to exceed 300°F, or the operating pressure is to exceed the values listed in the table above, please contact BETE Applications Engineering for assistance. Spray angle performance varies with...