FULL CONE Maximum Free Passage DESIGN FEATURES • Ultimate clog-resistant design with largest free passage available in a full cone nozzle • Two unique S-shaped internal vanes allow free passage of particles • High energy efficiency • Easily handles dirty, lumpy liquids • Male and female connections • Flanged connection available • U.S. Patent SPRAY CHARACTERISTICS • High reliability spray performance under the most difficult conditions Spray pattern: Full Cone (Square patterns to special order) Spray angles: 30°, 60°, 90°, and 120° Flow rates: 0.7 to 978 gpm (Flow rates up to 4500 gpm available; call BETE Applications Engineering for details.) Wide Angle Metal Dimensions are approximate. Check with BETE for critical dimension applications. MaxiPass Flow Rates and Dimensions Full Cone, Extra Narrow 30° (NN), Narrow 60° (N), Medium 90° (M) and Wide 120° (W) Spray Angles, 3/8 " to 4" Pipe Sizes Male or Female Pipe Size GALLONS PER MINUTE @ PSI Nozzle Number Approx. Approx. Dimensions (in.) Free Overall length (MAX) Wt.** Passage 30° 60° 90° 120° (lbs.) Dia. (in.) A A A A B Metal TO ORDER: specify pipe size, connection type, nozzle number, spray angle, and material. Flow Rate (GPM ) = K (PSI ) 0.47 ** Weights given are for 60°, 90°, and 120° Standard Materials: Brass, 316 Stainless Steel, PVC, Polypropylene, and PTFE. (PTFE not available in 3/8" and 1/2" sizes. Cobalt A6 not available in 3/8”.) The spray angle of wide and medium angle whirl nozzles is affected by increasing pressure. Contact BETE Applications Engineering when using the MaxiPass above 40 PSI. *3/8” and 1/2” sizes: 30° not available, 60° not available in plastic Spray angle and pattern vary with pressure. Contact BETE for specific data on

MaxiPass® Free Passage Traditional Full Cone Free Passage A comparison of the free passage available with the BETE MaxiPass nozzle compared to the free passage of a traditional full cone nozzle. The BETE MaxiPass is designed to pass solid particles that are 2-3 times larger in diameter than particles that will pass through a traditional full cone nozzle. FULL CONE A cutaway view of the MaxiPass nozzle showing the S-shaped vanes that enable the nozzle to successfully handle large particles without clogging. For plastic dimensions, please call BETE Customer Service. Dimensions are approximate....