Pneumatically Actuated - Low Flow Flat Fan DESIGN FEATURES • Interchangeable flat fan spray tips • Pneumatically actuated for crisp on/off spray • Straight through porting for in-series set-up • Variety of mounting brackets available SPRAY CHARACTERISTICS • Relatively coarse atomization • Uniform distribution with tapered edges for use in overlapping sprays Spray pattern: Flat Fan Spray angles: 0° to 110° Flow rate: 0.024 to 24.7 gpm Easy to maintain; positive sealing performance! • Fluid Connection Size: 1/8”, 1/4”, Female, NPT/BSP Two fluid ports are standard, allowing for an in-series setup; a plug to seal one port is included. TO ORDER: specify pipe size, connection type, nozzle number, spray angle, and material. • Maximum Fluid Pressure: 600 psi • Air Cylinders: Single-acting spring extend type. Air pressure retracts the rod and allows flow through the nozzle. Removing air pressure extends the rod and seals the nozzle. Double-acting cylinder available upon request. • Air Connection Size: 1/8” Female NPT; 1/8” Female BSP Adapter automatically included when fluid connection is BSP • Air Cylinder Pressure: Minimum: 30 psi*; Maximum: 250 psi. *For larger BJ tips, more pressure may be required to break seal. • Frequency Rating: Up to 180 cycles/minute, with an appropriate solenoid valve (Cv=0.08 minimum). • Weights: HP01 Assembly: 1.3 lbs; HP02 Assembly: 1.5 lbs • Operating Temperature Range: -15 °F to 400 °F. Nylon Mounting Hardware: 250 °F MAX • Standard Materials: Body: Nickel-plated Brass or 303 Stainless Steel Internals: PTFE, Viton, 303SS Air Cylinder: Stainless Steel, Anodized Aluminum, PTFE, and Viton® Flui

HydroPulse Optional Mounting Bracket Kits Kit 01 Angle Bracket Kit 03 Clamp Bracket Item Number Part Name FLOW CONDITIONER (HP 02 ONLY) HEX SOCKET PLUG BODY BUSHING O-RING BACK-UP RING In-series set-up possible; see instruction manual for more details. SEALING WASHER Brackets: 316 Stainless Steel; Hardware: 18-8SS with Nylon locking insert Kit 04 Direct Mount V-Block Bracket COMPRESSIBLE BUSHING

HydroPulse® Components & Options Spray Set-up Number Series Style BJ (BJ20-70 only available for Body Style 02) Spray Angle Mounting Hardware

HydroPulse® Components & Options A A - Overall Length (inches) HP01 Available Spray Angles Spray angle performance varies with pressure. Contact BETE for specific data on critical applications. BJ Tip Materials: Brass, 303 Stainless Steel, and 316 Stainless Steel. Call for the name of your nearest BETE representative. Flat Fan (BJ) Tip - Flow Rates, Dimensions, and Angles