BETAFLEX T- 405+ High Stress (HS)

Product catalog summary

Product Overview:
BETAFLEX T-405+ High Stress (HS) is an asbestos-free gasket jointing sheet designed for high-performance applications. It is oil-resistant and exhibits excellent thermal, chemical, and mechanical properties. Suitable for use with fuels, alcohols, gases, hydrocarbons, steam, water, cooling liquids, and most diluted acids and alkalis under high-stress conditions.

Material Composition:
The gasket is composed of mineral fibre, synthetic fibre, aramid fibre, and high-quality NBR binders.

Operating Conditions:

Maximum Peak Temperature: 405°C
Maximum Continuous Temperature: 320°C
Maximum Continuous Temperature with Steam: 250°C
Maximum Operating Pressure: 150 Kg/cm²

Physical Properties:

Density: 1.70 - 2.00 gm/cm³
Tensile Strength (ASTM F152): > 14 N/mm²
Tensile Strength (DIN 52910): > 11 N/mm²
Compressibility (ASTM F36A): 6 – 12%
Recovery (ASTM F36A): > 50%
Fluid Absorption in ASTM Oil No. 3: Increase in Mass < 10%, Increase in Thickness < 8%
Fluid Absorption in Fuel B: Increase in Mass < 10%, Increase in Thickness < 7%
Fluid Absorption in Water/Antifreeze: Increase in Mass < 15%, Increase in Thickness < 7%
Ignition Loss (DIN 52911): < 30%
Sealability Against Nitrogen (DIN 3535): < 0.5 cm³/min
Stress Resistance at 300°C (DIN 52913): ~ 20 N/mm²
Stress Resistance at 175°C (DIN 52913): ~ 30 N/mm²

Additional Information:
The data provided is based on extensive experience in the production and operation of sealing elements. Due to the variety of possible installation and operating conditions, it is recommended to consult with Betaflex Jointing Pvt Ltd for specific applications.

Contact Information:
Betaflex Jointing Pvt Ltd, E8, Old Industrial Area, Bahadurgarh – 124507, Distt. Jhajjar (Haryana). Email: [email protected], Website: www.betaflexjointing.co.in

Catalog excerpts

BETAFLEX JOINTING PVT LTD Technical Data Sheet BETAFLEX T- 405+ High Stress (HS) ASBESTOS FREE GASKET JOINTING SHEET This product Suitable for high performance, oil resistant gasket material with excellent thermal, chemical & mechanical properties. suitable for fuel, alcohols, gases hydrocarbons, steam, water, cooling liquid, most diluted acid alkalies for high stress conditions. General data: Material Composition (Type of fibres) Mineral Fibre, Synthetic Fibre Aramid Fibre, quality NBR OPERATING CONDITION Max.Peak Temp Continuous Temp.with steam Max. Operating Pressure! Physical Properties: The following Information applies to material thickness 2.00 mm. TENSILE STRENGTH TEST METHOD (a) ACC to ASTM F152(ACROSS GRAIN) (b) ACC to DIN52910 (ACROSS GRAIN) 3. FLUID ABSORPTION (a) IN ASTM OIL NO. 3

Open the catalog to page 1

IGNITION LOSS SEALABILITY AGAINST Nitrogen All data quoted above are based on years of experience in production & operation of sealing elements, in view of the wide variety of possible installation & operating conditions one can not draw final conclusion in all application cases regarding the behaviour in gasket joint. Should you have any doubts about the choice of gasket material, please refer to us. Betaflex Jointing Pvt Ltd E8 , Old Industrial Area , Bahadurgarh – 124507 , Distt. Jhajjar (Haryana) email : [email protected] Website www.betaflexjointing.co.in

Open the catalog to page 2

BETAFLEX T- 405+ High Stress (HS)

BETAFLEX T- 405+ High Stress (HS)

Catalog excerpts

All Betaflex Jointing Pvt. Ltd. catalogs and technical brochures