Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Betaflex Jointing Pvt. Ltd.
  3. BETAFLEX T-330

BETAFLEX T-330

BETAFLEX T-330
1 / 3 PagesView full catalog

BETAFLEX T-330

Product catalog summary
Product Overview: The BETAFLEX T-330 is an asbestos-free gasket jointing sheet designed for oil resistance with excellent thermal, chemical, and mechanical properties. It is suitable for low steam and surface pressure applications and is recommended for the automotive industry.
Material Composition: The sheet is composed of aramid and mineral fibers, with NBR as the binder.
Operating Conditions: The maximum peak temperature is 330°C, the maximum continuous temperature is 240°C, and the maximum operating pressure is 100 Kg/cm2.
Physical Properties: The data provided applies to a material thickness of 2.00 mm. Key properties include:
  • Density: 1.70 - 2.00 gm/cm3
  • Tensile Strength: > 8 N/mm2 (ASTM F152), > 5 N/mm2 (DIN52910)
  • Compressibility: 7 – 15% (ASTM F36A)
  • Recovery: > 50% (ASTM F36A)
  • Fluid Absorption: < 15% mass increase in ASTM Oil No. 3, < 10% thickness increase; < 10% mass and thickness increase in Fuel B; < 15% mass increase and < 7% thickness increase in Water/Antifreeze (ASTM F 146)
  • Ignition Loss: < 35% (DIN 52911)
  • Sealability Against Nitrogen: < 1.0 cm3/min (DIN 3535)
Additional Information: The data is based on extensive experience in production and operation of sealing elements. For specific application cases, consultation with Betaflex Jointing Pvt Ltd is recommended.
Contact Information: Betaflex Jointing Pvt Ltd, E8, Old Industrial Area, Bahadurgarh – 124507, Distt. Jhajjar (Haryana). Email: [email protected], Website: www.betaflexjointing.co.in
See more

Catalog excerpts

BETAFLEX T-330-1

BETAFLEX JOINTING PVT LTD Technical Data Sheet BETAFLEX T-330 ASBESTOS FREE GASKET JOINTING SHEET Applications: This Product suitable for ,oil resistant gasket material with excellent thermal, chemical and mechanical properties . Suitable for low steam pressure, low surface pressure . This material is also recommended for automotive industry. General data: Material Composition (Type of fibres) Aramid Fibre, Mineral Fiber . OPERATING CONDITION Max.Peak Temp Max. Continuous Temp Max. Operating Pressure Physical Properties: The following Information applies to material thickness 2.00 mm. TEST METHOD TENSILE STRENGTH (a) ACC to ASTM F152(ACROSS GRAIN) FLUID ABSORPTION

 Open the catalog to page 1
BETAFLEX T-330-2

IGNITION LOSS SEALABILITY AGAINST Nitrogen STRESS RESISTANCE All data quoted above are based on years of experience in production & operation of sealing elements, in view of the wide variety of possible installation & operating conditions one can not draw final conclusion in all application cases regarding the behaviour in gasket joint. Should you have any doubts about the choice of gasket material, please refer to us. Betaflex Jointing Pvt Ltd E8 , Old Industrial Area , Bahadurgarh – 124507 , Distt. Jhajjar (Haryana) email : [email protected] Website www.betaflexjointing.co.in

 Open the catalog to page 2

All Betaflex Jointing Pvt. Ltd. catalogs and technical brochures

  1. BETAFLEX T- 405+ High Stress (HS)
    BETAFLEX T- 405+ High Stress (HS)

    2  Pages

  2. BETAFLEX T- 405
    BETAFLEX T- 405

    2  Pages

  3. BETAFLEX T-450 CF
    BETAFLEX T-450 CF

    2  Pages

  4. BETAFLEX T-250
    BETAFLEX T-250

    2  Pages

  5. BETAFLEX T-200
    BETAFLEX T-200

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.