Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Betaflex Jointing Pvt. Ltd.
  3. BETAFLEX T-200

BETAFLEX T-200

BETAFLEX T-200
1 / 2 PagesView full catalog

BETAFLEX T-200

Product catalog summary
Applications: The BETAFLEX T-200 Asbestos Free Gasket Jointing Sheet is suitable for use in low-pressure steam, transformers, compressors, oil, fuels, lubricants, water, and inert gases under low stress conditions.
General Data: The gasket material is composed of mineral fibre, organic fibre, and elastomers, specifically NBR. It can withstand a maximum peak temperature of 200°C, a continuous temperature of 150°C, and a maximum operating pressure of 40 Kg/cm2.
Physical Properties: The data provided applies to a material thickness of 2.00 mm. Key properties include:
  • Density: 1.70 - 1.90 gm/cm3
  • Tensile Strength: > 7 N/mm2 (ASTM F152 across grain)
  • Compressibility: 7 – 15% (ASTM F36A)
  • Recovery: > 40% (ASTM F36A)
  • Fluid Absorption: Increase in mass and thickness under various conditions (ASTM F 146)
  • Ignition Loss: < 40% (DIN 52911)
  • Sealability Against Nitrogen: Measured in cm3/min (DIN 3535)
Additional Information: The data is based on extensive experience in the production and operation of sealing elements. However, due to the variety of possible installation and operating conditions, the data should not be used to support warranty claims. For assistance in choosing the appropriate gasket material, contact Betaflex Jointing Pvt Ltd.
Contact Information: Betaflex Jointing Pvt Ltd, E8, Old Industrial Area, Bahadurgarh – 124507, Distt. Jhajjar (Haryana). Email: [email protected], Website: www.betaflexjointing.co.in
See more

Catalog excerpts

BETAFLEX T-200-1

BETAFLEX JOINTING PVT LTD Technical Data Sheet BETAFLEX T-200 ASBESTOS FREE GASKET JOINTING SHEET Applications: This Product Suitable for low pressure steam , transformers, compressors , Oil ,fuels , lubricants , Water and inert gases for low stress conditions. General data: Material Composition (Type of fibres) Binders Gasket material based on Mineral Fibre & Organic Fibre & Elastomers NBR OPERATING CONDITION Max.Peak Temp Operating Pressure Physical Properties: The following Information applies to material thickness 2.00 mm. TEST METHOD TENSILE STRENGTH (a) ACC to ASTM F152(ACROSS GRAIN) FLUID ABSORPTION

 Open the catalog to page 1
BETAFLEX T-200-2

IGNITION LOSS SEALABILITY AGAINST Nitrogen STRESS RESISTANCE All data quoted above are based on years of experience in production & operation of sealing elements, in view of the wide variety of possible installation & operating conditions one can not draw final conclusion in all application cases regarding the behaviour in gasket joint. The data may not therefore, be used to support any warranty claims. Should you have any doubts about the choice of gasket material, please refer to us. Our engineering cell will be happy to assist you. Betaflex Jointing Pvt Ltd E8 , Old Industrial Area , Bahadurgarh...

 Open the catalog to page 2

All Betaflex Jointing Pvt. Ltd. catalogs and technical brochures

  1. BETAFLEX T- 405+ High Stress (HS)
    BETAFLEX T- 405+ High Stress (HS)

    2  Pages

  2. BETAFLEX T- 405
    BETAFLEX T- 405

    2  Pages

  3. BETAFLEX T-450 CF
    BETAFLEX T-450 CF

    2  Pages

  4. BETAFLEX T-330
    BETAFLEX T-330

    3  Pages

  5. BETAFLEX T-250
    BETAFLEX T-250

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.