Beta RSC 55
108Pages

Beta Utensili S.p.A. Via Volta 18 20845 Sovico (MB) Tel. 039.2077.1 Fax 039.2010742 www.beta-tools.com Promotion valid until 31/12/2019 subject availability Promotion valid until 31/12/2019 The images are for reference only. Beta Utensili S.p.A. reserves the right to update and upgrade its product range without notice.

Configure your workshop online

Containers and Assortments 4+20 Cutting tools 42 Drilling and threading tools 41 General maintenance tools 47+55

Certified quality In 2018 Beta roller cabs were awarded prestigious Tuv certification, after passing severe tests according to protocol EK5/TA5. Protocol EK5/TA5 deals with 31 well-defined building characteristics, stringent static tests and dynamic behaviour tests. Other tests determine resistance to high and low temperatures, the service life of markings over time and corrosion resistance. Credit for this achievement is due to the expert design, accurate manufacture and stringent tests Beta relies on for its roller cabs, which has allowed their quality to be acknowledged by end users....

Choose the roller cab which best fits your requirements!

• Four castors with steel cores, Ø 125 mm: 2 fixed and 2 steering (one with brake). • Front centralized safety lock. + STURDINESS + LIGHTWEIGHTNESS Built-in side and rear bottle and paper holders. Sturdy multi-purpose worktop with tote-trays and holes for accommodating screwdrivers. • Pull-out drawer with opening system throughout its length. Uprights and drawer front made of aluminium alloy Higher, sturdier, safer! • Four castors with steel cores, Ø 125 mm: 2 fixed and 2 steering (one with brake). • Front centralized safety lock. Built-in side bottle and paper holders, adjustable in...

C24S Mobile roller cab • Four castors with steel cores, 0 125 mm: 2 fixed and 2 steering (one with brake). • Front centralized safety lock. • Can accommodate paper roll holder item 2400S-R/PC, to be ordered separately. Anti-tilt system ABS worktop, with 6 tote-trays. Sturdy nylon front, with built-in label holder. Built-in side bottle holder. Mobile roller cab with anti-tilt system, long model • Four castors with steel cores, 0 125 mm: 2 fixed and 2 steering (one with brake). • Front centralized lock. • Can accommodate paper roll holder item 2400S-R/PC, to be ordered separately.

Multi-ply wood worktop with holes for a vice (1599F/100, to be ordered separately). k C24SL-CAB Mobile roller cab with 7 drawers and tool cabinet • Four castors with steel cores, 0 125 mm: 2 fixed and 2 steering (one with brake). • Front centralized lock. C24SL Mobile roller cab with 7 drawers and side tops 7 drawers (588x367 mm) with ball bearing slides: 5 drawers, 70 mm high 1 drawer, 140 mm high 1 drawer, 210 mm high. • Drawer bases protected by foamed rubber mats. • Four castors 125 mm in 0: 2 fixed and 2 steering (two with brakes). • Front centralized safety lock. • Static load...

SuperTank trolley with worktop and 10 drawers Multiply wood worktop with holes for a vice (1599F/150, to be ordered separately) 5 side drawers. • 5 front drawers. • Drawer bases protected by foamed rubber mats. • 4 high-capacity castors 150 mm in 0: 2 fixed and 2 steering (with brakes). • 2 centralised safety locks. Beta stainless steel tools can be autoclave sterilized at 121 °C Mobile roller cab with seven drawers, made of stainless steel • Four castors with steel cores, 0 125 mm: 2 fixed and 2 steering (with brakes); • Front centralized lock; • Frame made entirely of stainless steel •...

“Endurance” workbench Worktop made from multi-ply wood with holes for vice item 1599F/125 (to be ordered separately). • Drawers protected by foamed rubber mats. • Hard-wearing nylon drawer front. • Drawers can accommodate thermoformed trays. • Front centralized safety lock. • Lower object shelf. • Can be fitted with paper roll holder (2400S-R/PC) and bottle holder (2400S/PF), to be ordered separately. Endurance workbench with 1 cab with 6 drawers • 6 drawers (588x367 mm) with ball bearing slides: 4 drawers, 70 mm high 1 drawer, 140 mm high 1 drawer, 280 mm high. C59B “Endurance” workbench...

Workbench, for workshop equipment combination Comprised of: Bench with worktop 2050x700 mm covered with a shockproof, non-scratch PVC coat, resistant to oil and hydrocarbons • Holes for a vice (1599F/150, to be ordered separately) • Vertically adjustable feet Mobile roller cab with seven drawers 588x367 mm with ball bearing slides • 4 castors Ø 100 mm, 2 fixed (one with brake) and 2 steering • Drawer bases protected by foamed rubber mats • Front centralized lock Fixed module with seven drawers 588x367 mm with ball bearing slides • Drawer bases protected by foamed rubber mats • Front...

Folding workbench 30-mm-thick worktop made of MDF and galvanized sheet iron; can be used on both sides. Handle with rubber protection for easy transport. Feet with anti-slip coating. COMPACT AND EASY TO CARRY 500 mm

C56 Workbench • Worktop made of painted sheet metal with external edge • Steel frame with 6 supporting legs • Static load capacity: 1200 kg • Matches panel toolholder C57P; cannot be fixed to worktop • Two drawers with lock • Can be fixed to floor C51 — Trolley • 3 tops covered in antislip ribbed rubber • Ergonomic handle • Two fixing options for central worktop • Four castors 0 100 mm: 2 fixed and 2 steering (1 with brake) • Static load capacity: 200 kg (distributed between 3 shelves) CP51 — High-grade trolley • 2 tops covered with rubber mats • Ergonomic handle • Four high-grade castors 0...

Folding tool trolley for outdoor jobs, empty • Folding tool trolley, with folding columns for effortless transport. • 2 drawers, 588x277 mm, with ball bearing slides, for two-way opening. • Large lower object compartment, 588x277x220 mm. • Sheet metal frame. • 2 fixed castors, 0 160 mm, and 2 steering castors, 0 100 mm with brake. • Thermoplastic worktop with 6 built-in tool trays. • Centralized lock. • Can accommodate drawer partitions and MC foam tool trays 5927VU/M Assortment of 108 tools for trolley C27S, in soft foam tray