Service Equipment - D Series
12Pages

SERVICE EQUIPMENT SERVICE EQUIPMENT

TABLE OF CONTENTS COMBINATING SERVICE EQUIPMENT COMBINATING SERVICE EQUIPMENT CD431 Combinating Kit This small desk-drawer size kit contains everything necessary to combinate a BEST® core. It includes a complete selection of pin segments, springs, caps, a capping block, two capping pins, an ejector pin, tweezers, two standard keys and a key gauge. When securely closed, the kit may be carried in any position without mixing contents. Kits can be ordered separately or combined (1C core) & (5E cylinder). To order 1C kit only: To order 1C & 5E combined kit: CD431-2 (A2 system) CD431-25E (A2...

AD501 Key Cut Indicator (included in kit) The key cut indicator makes it possible to immediately determine the proper cut of BEST® keys. (For accurate test, use AD502(D) Digital Calibration gauge; see below.) Key cut indicator is heavy steel, 2 13⁄16” x 1 1⁄4”. To order specify: AD501-2 (for A2 system) AD501-3 (for A3 system) AD501-4 (for A4 system) AD502(D) Digital Calibration Gauge The new combinator calibration gauge (Manual or (D) Digital) is designed to be used with the AD433 and AD433P key combinators. It can be used for normal combinator inspection and adjustments, or for calibrating...

COMBINATING SERVICE EQUIPMENT COMBINATING SERVICE EQUIPMENT DD513 Core and Key Marking Block This steel tool securely holds any BEST® core and/or key for accurate stamping with letter and number dies. Size is 1” x 1 1⁄4” x 2 1⁄4”. NOTE: Marking the face of Peaks® cores can damage the face, resulting in faulty operation. To order specify: DD513 marking block DD514 Core and Key Marking Plate This plate can hold 5 cores for end-marking, 5 cores for side-marking and 10 keys for bowmarking at one time. It speeds the marking process and helps avoid error in sequential numbering and lettering. A...

DD502 Letter and DD503 Number Dies Durable high carbon steel number and letter dies for marking BEST® cores and keys are available in 1⁄16” or 3⁄32” letter heights. To order specify: DD502 letter dies or DD503 number dies and add the height of letter required Example: DD502 letter dies x 3⁄32”. DD502 DD537 BEST/LPS Spray Lubricant Factory tested and approved greaseless lubricant leaves a thin continuous lubrication film. Can be used with locks, even where other lubricants have been applied. Conforms to ANSI 156.6 cycle tested standards. To order specify: DD537 BEST/LPS lubricant 5ED261...

QU-I.C-SYSTEM DEDICATED PACKAGES QU-I.C-SYSTEM COMBINATING TOOL PACKAGES Dedicated Packages – These QU-I.C-KEYS are permanently factory built specifically for just one key system. GM and Control codes required. Intended for long-term use by Institutional Locksmiths who continuously work with the same key system(s). BQDP – Basic QU-I.C-KEY Dedicated Package Dedicated QU-I.C-KEY and Viewing Base QU-I.C-LOAD Tool Includes the 7 main system tools QU-I.C-CHEX Tool QU-I.C-CHEX Tool QU-I.C-TEST Tool PQDP – Professional QU-I.C-KEY Dedicated Package Dedicated QU-I.C-KEY and Viewing Base QU-I.C-LOAD...

Dedicated QU-I.C-KEY and Viewing Base (QKD / A2 or A4 / 6 or 7-pin / GM and CTL) This unique tool is permanently built to provide every pin segment calculation for your specific master key system (GM and Control). Every calculation is clearly displayed and incorporates an innovative colorcoded system. No math skills are required; no pen and paper are necessary; no slide charts; no computer programs; and no power needed (except for a twist of your wrist). Available in A2 or A4, 6 or 7-pin. Universal QU-I.C-KEY Kit and Viewing Base (QKU / A2 or A4) This kit allows you to custom build a...

COMBINATING SERVICE EQUIPMENT 83KA2A Mortise-to-Cylindrical Lock Adaptor Kits Mortise lock mounting may be converted to BEST® 6K and 8K cylindrical lock through use of this kit. Specifications Materials – Stainless steel Finish – 630 Only. Escutcheon – 3 1⁄2” x 8 1⁄2” x .050 thickness Strike – 1 1⁄4” x 8” with 6 3⁄4” lip, 1 1⁄4” to center Face plate: 83KF1– 8” x 1 1⁄8” wide Backset – 2 3⁄4” (Fed spec. 161) Door thickness –Door thickness is increased 7⁄64” for mounting either 6K or 8K series locksets. To order an adaptor kit specify: 83KA2A adaptor kit One-Piece Universal...

KD304A Boring Jig Kit The KD304A jig kit is made for boring cut-outs in wooden doors for Fed. Spec. 160 and 161 series cylindrical/tubular locksets, doors 1 3⁄8” to 2 1⁄4” thick. The KD304A kit includes the boring jig (to drill wood doors for 2 3⁄8”, 2 3⁄4”, 3 3⁄4”, and 5” backsets), a quick-release adaptor for 3⁄8” drill chuck, a 2 1⁄8” bit, and a 1” diameter x 9” bit. The following kit items can also be purchased separately. KD309 – 2 1⁄8” bit KD318 – 1” dia. x 9” bit KD319 – 3⁄8”, quick release adaptor To order complete kits specify: KD304A Kit KD304A parts PADLOCK SERVICE EQUIPMENT F3 –...

ED211 Mortise Cylinder Wrench The BEST® mortise cylinder wrench and test handle is an essential double-purpose tool. It is used primarily to install or remove BEST mortise cylinders without marring the cylinder surface finish. It is also used to align throw pins, and as a testing tool when installing mortise or tubular units. The single end may be used to test the lock operation. To order specify: ED211 mortise cylinder wrench ED212 Mortise Cylinder Cam Assembly Tool Fast attachment of cams to BEST® mortise cylinders is effected with this important device. It works equally well with...

SERVICE EQUIPMENT SERVICE EQUIPMENT (Available only to registered BEST® Master Keyed System owners.)

SERVICE EQUIPMENT For more information on Stanley Security Solutions’ products, services, and ofce locations visit our web site at www.stanleysecuritysolutions.com Product information contained in this catalog has been compiled and presented with as much care and completeness as is reasonably possible. Errors or mistakes may be present, and in many cases, reliance has been placed on information supplied by other manufacturers which may be in error or which may be subject to changes or modications by the manufacturer without notice and without obligation. Therefore, no guarantee can be made...