Mortise Locksets - 40H Series
20Pages

Heavy Duty Mortise Locks Security Solutions

TABLE OF CONTENTS FEATURES 1. Solid one-piece stainless steel anti-friction latch provides 50% more surface contact with strike for superior strength and security. Reversible latch rotates 180 degrees for easy handing change without opening case. 3 Precision-engineered curve provides enhanced cycle life with reduced wear to the strike. 2. Non-handed cylinder retainer. 3. Armored front completely surrounds latch and deadbolt providing increased lateral strength. Staked assembly design allows the armored front to self-align with the door bevel during installation. 8 4. Enhanced case integrity...

ADA-Americans With Disabilities Act: 45H Series - The design and operation of the BEST® mortise lock meets the intent of the standard for ANSI A117.1 section 404.2.6. Builders Hardware Manufacturers Association: 45H Series - ANSI A156.13, Series 1000, Grade 1 Operation and Strength, Grade 2 Security. To meet Grade 1 Security, a drill resistant core (1CD, 1CDP, 1CDF, or 1CDX) must be used with escutcheon trims, and 1E7K4 high security cylinder must be used with sectional trims. 47H Series - ANSI A156.13, Series 1000, Grade 1 Operational, Strength, and Security. Underwriters Laboratories® The...

UNIVERSAL LOCK UNIVERSAL LOCK DESIGN CONCEPT Strength, Durability…and now Flexibility. Sure, a mortise lock is one of the strongest and longest lasting locks available. But who says it has to be the most complex to order and install? When designing the 40H mortise lock, BEST® decided to focus on things that would make the lock easier to use, while at the same time maintaining the strength, durability, and dependability you would expect in a BEST® mortise lock. In addition to the ability to quickly change the lock handing, the universal case design of the 40H provides the ability to...

Parts Ordering Made Easy No more searching through service manuals or calling technical support for the right part numbers. BEST® has developed a variety of kits you can order when you only need part of a 40H mortise, rather than the whole lock. Case Only A Case Only lock includes all parts normally included with a complete lock that are not specifically associated with either the inside or outside trim, including: lock case, face plate, strike and strike box, fasteners (for case and strike), and installation instructions. Case Only mortise locks will be shipped in the standard mortise...

HOW TO ORDER: 45H 45H 7 R 14 Series Core Function Code Lever Housing Style 45H– 0– non A– office Standard Levers: standard keyed or D– storeroom 3– solid tube/return mortise lock dummy L– privacy 12– solid tube/no return trim N– passage 14– curved return 7– 7 pin R– classroom 15– contour/angle return housing T– dormitory 16– curved/no return accepts etc. 17– gull wing all BEST cores Knobs: 4– round H Trim Style 3 H– 2 /4” dia. R– 2 3/4” dia. S– 3 1/2” dia. J– wrought M– forged N– forged (concealed cyl.) RH Door Hand RH RHRB LH LHRB LL– lead lined SH– security head screws Thick Door–...

HOW TO ORDER: 40H STRIKE PACKAGES 1 626 Kit Number Finishes Options 605 606 611 S1– standard strike Thick Door– (specify thickness if other 612 613 618 than 1 3/4” ) S5– latchbolt-only strike 619 622 625 S6– latchbolt/deadbolt strike 7/8LTC– 7/8” lip-to-center strike 626 629 630 4– strike box only SH– security head screws 690 page 4-5 HOW TO ORDER: 40H LEVER SETS 1 626 Kit Number Finishes Options Levers: 605 606 Thick Door– (specify 611 612 3– solid tube/return thickness if other than 1 3/4” ) 613 618 12– solid tube/no return SH– security head screws 619 622 14– curved return VT– vandal...

SPECIAL FEATURES SPECIAL FEATURES Lead Lined Feature – The 40H mortise lock can be lead lined to protect against x-rays. Since the majority of lead lined doors contain the lead in the surface of the door, the 40H provides lead lining for the holes cut in the door when preparing the door for the trim. The cylinder hole is lead lined. To order: designate “LL” on order procedure (page 6-7) Security Head Screws – Security head screws. To order: designate “SH” on 45H/47H in order procedure (page 6-7). Tactile Feature Knob/Lever – This option is for use in applications where special notice is...

MORTISE SAMPLE SPECIFICATIONS MORTISE SAMPLE SPECIFICATIONS A. Locksets and Latchsets: [Best Access Systems.] - [___________.] [__________.] 1. Base Specification: Best Access Systems components as listed in Hardware Schedule per Article 3.05. 2. Locksets and latchsets of other acceptable manufacturers must conform to the requirements of Subparagraphs 3 and 4. 3. Mortise Type: a. Locksets shall be tested and approved by BHMA for ANSI A156.13, Series 1000, Operational Grade 1, Extra-Heavy Duty, Security Grade 2 and be UL10C b. Locksets shall be mortise type with solid 3/4 inch throw...

40H SERIES – STANDARD LEVERS, KNOB & TRIMS 40H SERIES - STANDARD LEVERS, KNOB & TRIMS

40H SERIES – STANDARD LEVERS, KNOB & TRIMS 40H SERIES - STANDARD LEVERS,KNOB & TRIMS

40H SERIES – DECORATIVE LEVERS 40H SERIES - DE S DECORATIVE LEVERS

40H SERIES – DECORATIVE LEVERS 40H SERIES - DECORATIVE LEVERS

FUNCTIONS Function & Diag. Description ANSI No. Latch operated by Single Keyed A-Office (F04) Outside Lever or Knob Deadbolt operated Locked by by Placing locking toggle in locked position Inside Knob/Lever Locked by Unlocked by Placing locking toggle in unlocked position Always unlocked Turning key in outside cylinder and placing locking toggle in unlocked position Always unlocked The latchbolt is deadlocked with an auxiliary deadlatch • Rotating inside lever, N/A • Turning inside lever, • Rotating outside lever • Turn key in outside only when unlocked cylinder. by key or turn lever, •...