The C Series is ANSI BHMA A156.5 certified C SERIES – CORES & SPECIAL APPLICATION CORES Core Size Keyway Code Combination Code 6C core (4S display case) Core Type 5C core (High security mortise) 1C– standard 1CK– patented 1CP– premium 1CM– Cormax-M series 1CX– Cormax-X series 3C– for 8E cylinder 5C**– high security 6C– for 4S cylinder Designate specific 1– uncombinated keyway (A, E, 2– combinated etc.) 606 Options B*– pick & drill resistant (1C only) K*– key trap T*– deadlocking (6C only) *Extra cost option. **Long blade key required. If combinated, you must specify keymark and number of keys....

SEMI-TRAILER KINGPIN LOCK 2J7L11 Single latch armored kingpin lock operated by single key. 2J7L21 Double latch armored kingpin lock requires two separate authorized keys to open. Operation The semi-trailer lock, locks onto the kingpin on a dropped semi-trailer to prevent hookup. The lock is automatically secured when pushed onto the kingpin and the key(s) can be withdrawn only in the locked position. Bright red finish signals driver not to back into lock. The deadlocking bolt functions listed below (D11, D21) feature a deadlocking bolt controlled by key to prevent bolt(s) from being shimmed or...

2P SERIES: PUSH LOCKS FOR FILING CABINETS Specifications Material– Parts are solid brass; phosphor bronze springs. Dimensions– See illustration and table. Finish– 2P series 626 (satin chrome) standard finish. The 2P series incorporates the BEST interchangeable core and requires special cabinet preparation. It may be keyed individually, keyed alike, masterkeyed or grand–masterkeyed with other BEST removable core products. Dimensions in inches Vertical Mounting Slot C D E F G L 2P73 Vertical Mounting Slot Horizontal Mounting Slot 2P74 (7Barrel) Lock Housing Combination Code Designate specific keyway...

Operation A stainless steel strap mounts permanently on the inner sliding panel. When panels are closed, the tongue of the strike strap extends beyond the edge of the outer panel. To lock panels, slide lock housing as close to overlapping panel edge as possible and lock by turn of key. Key is removable in locked position only. Specifications Strike Strap– Stainless steel, 1⁄2” wide Finish– 627 aluminum only 3S SERIES SLIDING PANEL LOCK Core Housing Function Code Combination Code Standard Finish 3SS2– standard unless otherwise specified 3S– sliding panel lock 7– 7-pin housing 5– straight lock...

KRD SERIES KEY RETAINING DEVICES Key Retainer Device Operation and Benefits The key retaining device is an effective tool for improving key control. With a key retaining device, a release key is inserted into the retaining device and rotated. The rotation of this key both releases the retained key and traps the release key. The release key remains trapped until the retained key is returned and rotated. When this happens, the release key can be extracted, but the retained key is trapped. These retaining devices establish accountability for important keys (ex: master keys, emergency bypass keys,...

KRD-2 Non-BEST Full Size Core Models (Cores and Keys not included) Identical in operation to the KRD-2 for BEST cores, but these devices will accept other manufacturers’ IC’s and RC’s. Some manufacturers of both 6 and 7-pin cores require a different version for each. A complete listing appears in HOW TO ORDER below. Specifications for these models are the same as the KRD-2 shown on the previous page. KRD-3 BEST Core Dual Function Model (Cores and Keys not included) This three core model accepts BEST 5, 6 and 7-pin cores and provides the user with a choice of two different functions: KRD SERIES...

For more information on Stanley Security Solutions’ products, services, and ofce locations visit our web site at www.stanleysecuritysolutions.com Product information contained in this catalog has been compiled and presented with as much care and completeness as is reasonably possible. Errors or mistakes may be present, and in many cases, reliance has been placed on information supplied by other manufacturers which may be in error or which may be subject to changes or modications by the manufacturer without notice and without obligation. Therefore, no guarantee can be made or should be assumed...