Lseries
12Pages

CABINET LOCKS CABINET LOCKS

TABLE OF CONTENTS 3L SERIES Operation–Deadbolt locked and unlocked by key. Must be locked by key after door is closed. Key may be withdrawn in locked position and unlocked position. Specifications Material– Bolt is stainless steel, springs are phosphor bronze, all other parts are brass. Backset– 7/8” Bolt– 1 1/8” x 3/16” – 3/4” throw Case– Height 1 21/32”, width 2 1/8”, thickness 21/32”, hole spacing 1 39/64” x 1 1/4” Cylinder diameter– 1 1/8” Cylinder length– 7-pin tumbler, 1 13/64” Finish– Base finish 606 unless otherwise specified. Keeper plate– None supplied. Products protected by one...

Specifications Latchbolt function– Retracted by key to unlock. Key may be withdrawn only in locked position Deadbolt function– Locked and unlocked by key. Must be locked by key after door is closed. Key may be withdrawn in locked position and unlocked position Backset– 7⁄8” Body thickness– 1⁄2” Case– Length 2 1⁄8”, width 2 19⁄32”, thickness 21⁄32”, hole spacing 2 3⁄16” Cylinder diameter– 1 1⁄8” Cylinder length– 1 1⁄16” Deadbolt– 3⁄4” x 25⁄64” – 1⁄2” throw Door thickness– 5⁄8” minimum for rim type, 21⁄32” minimum for mortise type. Face– 1 7⁄8” x 21⁄32” Latchbolt– 3⁄4” x 25⁄64” – 9⁄32” throw...

Mounting Positions Mortise (Vertical Mounting) Left-hand (Vertical Mounting) Strike plate specification: 3⁄64” x 11⁄16” x 1 7⁄8”; hole spacing 1 7⁄16” Standard strike supplied unless otherwise specified Mounting Housing Latch Type Standard Finish 7– 7 pin housing accepts all Best cores M– mortise D– deadbolt R– rim L– latchbolt 606 612 T– deadlock 626 (deadbolt (cylinder only) only) TR– special trim ring

The 8L7SPR mailbox lock features the convenience of the interchangeable core, allowing quick combination change, and is adaptable to a number of different mailbox manufacturers. The 8L7SPR can be masterkeyed into any existing BEST® system. Variations are available for adaptation purposes. To order: Specify mail box manufacturer and style number, and/or send sample of mail box door. Specifications Housing– Steel, zinc plated. Cylinder– Machined from solid aluminum. Cylinder head diameter– 1 1/8”. Latchbolt– 9/32” square with bevel. Handing– Right-hand standard – 8LSPR. Finish– 627 standard....

5E SERIES 3/4” UTILITY CYLINDER 5E Specifications: 5E6 – Series “A” (Body length)– 31/32”, Body diameter– 3/4”, Body– 6 pin, Head diameter– 7/8”, Finish – 626, “B” (Max. mounting thickness)– 11/16” 5E7 - Series “A” (Body length)– 1 1/8”, Body diameter– 3/4”, Body– 7 pin, Head diameter– 7/8”, Finish– 626, “B” (Max. mounting thickness) – 27/32” Standard 5E Assembly unit includes: Keyed 3⁄4” with cam (specify cam length - if length is not specified, the 5EC1 x 7⁄8” will be supplied as standard), hex nut, spacer collar (not supplied unless length is specified), and lock washer. Application:...

Specifications Material– All parts are solid brass; phosphor bronze springs. Dimensions– See illustrations and table below. Finish– 2P Series 626 (satin chrome) standard finish. 5P series finish to match satin chrome. (7 pin only). 2P SERIES PUSH LOCKS FOR FILE CABINETS The 2P series incorporates the BEST® interchangeable core and requires special cabinet preparation. It may be keyed individually, keyed alike, masterkeyed or grand-masterkeyed with other BEST® lock of any type. To order: Specify proper lock, finish and keying instructions. 2P73 Vertical mounting slot 2P74 Horizontal mounting...

2S SERIES PUSH LOCKS FOR SLIDING DOORS Specifications Case– extruded brass. Width– 1 1/2” Thickness– 23/32” Inside face plate– 2 3/4” x 7/8”, hole spacing 2 3/16”. Detachable face plate– 1/16” x 1 1/8” x 2 3/4”, hole spacing 2 3/16”. Strike– 2 3/4” x 1 1/8”, 2 3/16” hole spacing. Finish– 626 supplied unless otherwise specified. 2S73 Surface Mounted (BHMA E07161) FUNCTION CODE CHART Bolt Thickness /2” dia. x 7/16” bolt engagement. 1 /8” locking pin 1 Operation When unlocked, case of lock moves out through door stile and may be used as handle for moving door. To lock 2S73 and 2S74, push case...

3S SERIES SLIDING PANEL LOCKS Specifications Strike strap– stainless steel, 1/2” wide. Locking housing– aluminum. Finish– 627 aluminum only. Operation– A stainless steel strap mounts permanently on the inner sliding panel. When panels are closed, the tongue ofthe strike strap extends beyond the edge of the outer panel. To lock panels, slide lock housing onto overlapping tongue and up against edge of outer panel. Lock by turn of key. Key is removable in locked position only. 3S75 Strike strap Mounting Housing 3S– sliding panel lock 7– 7 pin housing accepts all Best cores M– straight lock...

SERVICE EQUIPMENT SERVICE EQUIPMENT 5ED253 Thread Tap Matches standard 24 thread on 5E series cylinder locks. To order specify: 5ED253 thread tap 5ED261 Capping Block The capping process for single shearline 5E cylinders requires the following: 5E slide caps: 5ECP6– 6 pin 5ECP7– 7 pin 5E Cylinder: 5ED261 Capping Block 5ED262 Cap Depressor Service Equipment for 5E Cylinders (single shearline) Best single shearline locks may be combinated to Grand Master, Master and/or any operating combinations in your BEST system. Utilizes the AD433 Key Combinator. See (D Series) Service Equipment Catalog...