CamSight® LS(+) Ultra Low SWaP Thermal Camera (high sensitivy) Key features Ultra low Size, Weight and Power (SWaP) LYNRED ATTO sensor: 640 x 480 @ 12μm Low latency Patented shutterless technology Thin pitch camera allowing lens size decrease Designed and manufactured in France with French thermal sensors Image captured by CamSight® LS with a13,6mm lens CamSight® LS is the newest Original Equipment Manufacturer (OEM) digital core camera developed by Bertin Photonics. To comply with users’ requirements, the camera has been designed to be easily integrated within complex optronic systems, such as rifle sights, ground or aerial drones and every equipment requiring ultra low SWaP. Based on a patented Bertin Photonics’ shutterless technology, it allows for low latency and freeze-free image delivery in realtime. CamSight® LS features an uncooled LYNRED ATTO infrared sensor designed for challenging applications. Lightweight, ultra-compact and very low-consuming, CamSight® LS can be implemented in very constrained environments. Indeed, thanks to its ergonomic design and high-performance, the camera fulfills most night and day surveillance, observation and infantry missions. CamSight® LS also exists in a Plug & Play version dedicated to end-users. The camera is available in two different versions: CamSight® LS+ (NETD < 40 mK F#/1.0 and CamSight® LS (NETD < 50 mK F#/1.0). Uncooled microbolometer Resolution, Pixel size Spectral band NETD (30Hz, 25°C) BERTIN TECHNOLOGIES 10 Bis, Avenue Ampère 78180 Montigny le Bretonneux France

CamSight® LS(+) PHYSICAL CHARACTERISTICS (without lens) OEM version OEM+ version Casing version with connector Weight Dimensions INTERFACES OEM version OEM+ version & casing version Parallel 14 bits / SD-SDI / MIPI CSI2 SD-SDI / PAL / MIPI CSI2 / GigE Vision Video stream : 25Hz (>9Hz requires a license delivered by the French government) RS-232, 3.3V TTL ELECTRICAL CHARACTERISTICS OEM version Connectors Input voltage Consumption Time to image OEM+ version MMCX7-SM, BM12B-SURS, LSHM-110, M06B-SURS-TF 4.5 – 5.1VDC < 0,9W < 1 sec (from off to on) Casing version with connector Hirose FL10WB OPERATION...

CamSight® LS(+) CAMSIGHT® LS PHOTOS Casing version OEM version with 13,6mm lens This list does not represent all compatible lenses. It is therefore possible to add lenses according to your needs. DRIs were calculate with TRM4. DRI (V) = DRI vehicle. DRI (S) = DRI soldier with NATO standard. Unity : meter. To calculate the overall weight of the CamSight LS with the lens, a mechanical interface (lens - core) must be added. Its weight depends on the lens and is about 10 grams. BERTIN TECHNOLOGIES 10 Bis, Avenue Ampère 78180 Montigny le Bretonneux Fra