Sanitation Certified High Performance 7

Product catalog summary

Overview: The document provides technical specifications for the Sanitation Certified High Performance 7 Ambient (Unheated) Air Curtain, designed for insect control with mounting heights up to 7 feet. It is EPH listed per NSF 37 and features a 3/4 hp single-speed motor with options for white or black aluminum exterior covers.

Specifications:

Dimensions: 14” high x 15” deep
Motor: 3/4 hp single speed
Mounting: Wall & Top Mounting
Certification: AMCA Seal for airflow rate, average outlet velocity, outlet velocity uniformity, velocity projection, and power rating
Sound Level: 66 dBA for 1 motor, 69 dBA for 2 motors

Model Configuration: The model number configuration includes series, opening width, number of motors, heat, voltage, and cabinet finish options. Models range from 36” to 120” in width, with options for custom colors and stainless steel finishes.

Performance Data:

Air Volume: Ranges from 1,846 cfm to 5,538 cfm depending on model
Outlet Velocity Uniformity: Between 38% and 79%
Power Rating: From 0.73 kW to 2.31 kW
Motor Configuration: 1 to 3 motors at 3/4 hp each

Electrical Performance: The document includes detailed electrical performance data, specifying amps per circuit breaker rating for various models and voltage configurations.

Compliance and Warranty: The air curtain is FDA recommended and USDA compliant, with a 5-year limited warranty.

Catalog excerpts

Sanitation Certified High Performance 7-1

SANITATION CERTIFIED HIGH PERFORMANCE 7 Ambient (Unheated) Air Curtain Data Sheet For Mounting Heights To 7’ (insect control) STANDARD CONSTRUCTION • EPH Listed per NSF 37 • 14” high x 15” deep • 3/4 hp single speed motor(s) • White or black aluminum exterior cover (Optional: Custom Color or Stainless) • Wall & Top Mounting Berner International Corporation certifies that the air curtains shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program. Rated data shown is for base (unheated) units. The AMCA Certified Ratings Seal applies to airflow rate, average outlet velocity, outlet velocity uniformity, velocity projection and power rating at free delivery only. Air Curtain Fans for ANSI/NSF37 Customer Entry maximum mounting height is 7' Cabinet Finish Built-In Switch White (leave blank) BK=Black SS=Stainless Steel CC=Custom Color for Standard offering, leave options (Opt.) blank make sure to specify Cabinet Finish if other than white VELOCITY PROJECTION: Model SHD07-1036A Sound level measured 10’ (3m) from the unit in free field: 1 & 2 motor(s): 66 dBA & 69 dBA Sound data is not AMCA certified. Berner reserves the right to alter specifications without prior notice. www.berner.com Berner International 800.245.4455 111 Progress Ave. / New Castle / PA / 16101 / USA ©Copyright, 2017 Berner International

Open the catalog to page 1

Sanitation Certified High Performance 7-2

Berner reserves the right to alter specifications without prior notice. www.berner.com Berner International 800.245-4455111 Progress Ave. / New Castle / PA / 16101 / USA ©Copyright, 2017 Berner International

Open the catalog to page 2

Sanitation Certified High Performance 7-3

END VIEW REAR VIEW FRONT VIEW A AIR curtain must be installed so air stream is not OBSTRUCTED WHEN DEFLECTED 20* TO EITHER SIDE DF (jT A ELECTRICAL CONNECTIONS TO BE FLEXIBLE. A FIELD VERIFY DIMENSIONS, A ANCHORS TO SUPPORTING STRUCTURE BY OTHERS. A ADEQUACY DF SUPPORTING STRUCTURE IS TD BE VERIFIED BY A PROFESSIONAL STRUCTURAL ENGINEER, A LETTER 'A' IN MODEL NUMBER DESIGNATES AMBIENT UNIT. A DIMENSIONS IN INCHES [CENTIMETERS!

Open the catalog to page 3

Sanitation Certified High Performance 7

Sanitation Certified High Performance 7

Catalog excerpts

All Berner International catalogs and technical brochures