1. Catalogs
  2. Berner International
  3. INDUSTRIAL FLY STOP 16

INDUSTRIAL FLY STOP 16

INDUSTRIAL FLY STOP 16

INDUSTRIAL FLY STOP 16

Product catalog summary
Overview: The Industrial Fly Stop 16 is an ambient (unheated) air curtain designed for door heights up to 16 feet, primarily for insect control. It comes with a 5-year limited warranty and is manufactured by Berner International Corporation.
Standard Construction: The air curtain features a 2 hp single-speed T.E.A.O. motor with direct drive, a gray powder-coated exterior with optional custom colors, OSHA-approved inlet guards, and is designed for wall mounting with top air intake only. An optional weather hood is available per motor.
Performance Specifications: The air curtain models vary in nozzle width from 42 to 144 inches, with a maximum velocity at the nozzle of 5,000 fpm. The average outlet velocity ranges from 3,400 to 5,229 fpm, and air volume ranges from 6,800 to 22,500 cfm. Outlet velocity uniformity is between 84% and 94%, with power ratings from 2.42 kW to 7.32 kW.
Model Configuration: Models are configured based on series, opening width, number of motors, heat voltage, and optional cabinet finish. Sound levels are measured at 93 dBA for one motor, 96 dBA for two motors, and 98 dBA for three motors.
Electrical Performance: The electrical performance sheet provides details on circuit requirements and motor amp draws for different voltage codes. For example, the motor amp draw is 2.8 amps for 208/3/60 voltage and 6.2 amps for 380/3/50 voltage.
Additional Notes: Operation at 50 Hz results in approximately a 17% reduction in air performance. Detailed amp draws and total load requirements are available on sheet EP-470.
See more

Catalog excerpts

INDUSTRIAL FLY STOP 16-1

INTERNATIONAL CORF. INDUSTRIAL FLY STOP 16 Ambient (Unheated) Air Curtain Data Sheet For Door Heights To 16’(insect control) STANDARD CONSTRUCTION • 2 hp single speed T.E.A.O. motor(s) - direct drive • Gray powder coated exterior (Optional: Custom Color) • OSHA approved inlet guards • Wall Mounting only • Top air intake only • Optional: Weather hood (1) per motor NOTE: Operation at 50 Hz will generate approximately a 17% reduction in air performance. See sheet EP-470 for amp draws/total load requirements. VELOCITY PROFILE: Model FLY16A-1042A Sound level measured 10' (3m) from the unit in free field: 1,2, 3 motor(s): 93 dBA, 96 dBA, 98 dBA_ MODEL NUMBER CONFIGURATION FLY16-1 042 A D-CC ,— i i r ~\ i i Series Berner reserves the right to alter specifications without prior notice. www.berner.com Berner International Corporation 800.245.4455 111 Progress Ave. / New Castle / PA / 16101 / USA ©Copyright, 2015 Berner International Corporation

 Open the catalog to page 1
INDUSTRIAL FLY STOP 16-2

INTERNATIONAL CORP. Berner reserves the right to alter specifications without prior notice. ©Copyright, 2015 Berner International Corporation

 Open the catalog to page 2
INDUSTRIAL FLY STOP 16-3

FLY 1 6 AMBIENT SYSTEM FLYSTOP END VIEW AIR FLOW BOTTOM VIEW AIR FLDW AIR CURTAIN MUST BE INSTALLED SE AIR STREAM IS NET DBSTRUCTED WHEN DEFLECTED 20° TD EITHER SIDE DF ELECTRICAL CDNNECTIENS TD BE FLEXIBLE, /3\ FIELD VERIFY DIMENSIONS, ANCHDRS TD SUPPORTING STRUCTURE BY DTHERS, ADEQUACY OF SUPPDRTING STRUCTURE IS TO BE VERIFIED BY A PROFESSIONAL STRUCTURAL ENGINEER, /6\ USE LARGE MEUNTING BRACKET FDR ALL UNITS 76' AND ABEVE, /7\ TWE MDTER FLY STDP AIR CURTAIN SHDWN, SEE DRAWING FLY16-MNT FDR MOUNTING BRACKET DIMENSIONS AND INSTALLATION INSTRUCTIONS, LETTER "A" IN MODEL NUMBER DESIGNATES...

 Open the catalog to page 3
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.