Commercial High Performance 10
3Pages

COMMERCIAL HIGH PERFORMANCE 10 Ambient (Unheated) Air Curtain Data SheetFor Mounting Heights To 10’(environmental separation) and 8’(insect control) Berner International Corporation certifies that the air curtains shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program. Rated data shown is for base (unheated) units. The AMCA Certified Ratings Seal applies to airflow rate, average outlet velocity, outlet velocity uniformity, velocity projection and power rating at free delivery only. STANDARD CONSTRUCTION • 14” high x 15” deep • 1/2 hp three speed motor(s) • Factory installed fan speed switch • White or black aluminum exterior cover (Optional: Custom Color or Stainless) • Wall & Top Mounting • Optional: Filter (washable) NOTE: Operation at 50 Hz will generate approximately a 17% reduction in air performance. See sheet EP-114 for amp draws/total load requirements. VELOCITY PROJECTION: Model CHD10-1036A MODEL NUMBER CONFIGURATION Remote Switch Cabinet Finish White (leave blank) BK=Black SS=Stainless Steel CC=Custom Color *Suitable for 50hz for Standard offering, leave options (Opt.) blank make sure to specify Cabinet Finish if other than white Sound level measured 10' (3m) from the unit in free field: 1 motor: Low/Medium/High Speed: 64/65/66 dBA Berner reserves the right to alter specifications without prior notice. www.berner.com Berner International 800.245.4455 111 Progress Ave. / New Castle / PA / 16101 / USA ©Copyright, 2017 Berner International

COMMERCIAL HIGH PERFORMANCE 10 Ambient (Unheated) Air Curtain Electrical Performance Sheet Berner reserves the right to alter specifications without prior notice. www.berner.com Berner International 800.245-4455111 Progress Ave. / New Castle / PA / 16101 / USA ©Copyright, 2017 Berner International

REAR VIEW AIR CURTAIN MUST BE INSTALLED SD AIR STREAM IS NDT OBSTRUCTED WHEN DEFLECTED 20* TO EITHER SIDE OF (£, ELECTRICAL CONNECTIONS TO BE FLEXIBLE. FIELD VERIFY DIMENSIONS, ANCHORS TO SUPPORTING STRUCTURE BY OTHERS. ADEQUACY DF SUPPORTING STRUCTURE IS TD BE VERIFIED BY A PROFESSIONAL STRUCTURAL ENGINEER, LETTER 'A' IN MODEL NUMBER DESIGNATES AMBIENT UNIT. DIMENSIONS IN INCHES [CENTIMETERS], :BERNER MODEL CHD10 AIR CURTAIN AMBIENT SYSTEM